Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

1/8 DIN High Accuracy True-RMS Scalable Indicator for AC Sinusoidal and Non-Sinusoidal Signals  - Discontinued

DP25-VRMS & DP25-CRMS

High Accuracy True-RMS Scalable Indicator for AC Sinusoidal and Non-Sinusoidal Signals | DP25-VRMS & DP25-CRMS

  • AC Voltage and Current Inputs
  • High 0.1% of Reading Accuracy
  • 4-Digit, 14 Segment LED Display, Red or Green
  • Exceptional Noise Rejection
  • Current or Voltage Inputs
  • Peak and Valley Detection
  • Front Panel Configuration
  • Optional Dual 5 Amp Relays, Analog Output, RS485
Test Meters - Electrical - View related products

Description

The DP25-VRMS & DP25-CRMS series have been discontinued. Please contact our Electrical Engineering department for a viable replacement.

The DP25-RMS Series digital panel meter features high accuracy, 4 digits, and ac and true-RMS scalable inputs. The 4 digit, 14-segment alphanumeric display ensures easy reading and reconfiguration. This meter uses an integrated circuit that computes the true root-mean-square value of complex input signals. ac voltage measurements with a frequency of up to 5 kHz can be measured.

The DP25-RMS has the capability to capture and display both peak and valley levels of input signals. A dual 5 amp relay is available and can be configured to provide on/off control. An isolated analog output is available, which can be configured for 4-20 mA or 0-10 Vdc. RS485 communication capability is also available. The true RMS AC input makes this meter an ideal instrument for use in power monitoring, piezoelectric sensors, signal conditioning, and many other applications.

The To Order box reflects base models only. In order to configure a part number with options, use the part number builder below.

Panel Punches are available for this product here.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
DP25-VRMS
Consult Sales  
Availability: 
 
 
Meter Input Ranges: 0-1V, 0-10 V, 0-100 V, 0-750 V
DP25-CRMS
Consult Sales  
Availability: 
 
 
Meter Input Ranges: 0-1 mA, 0-10 mA, 0-100 mA, 0-1 A, 0-5 A
DP25-CRMS-AR
Consult Sales  
Availability: 
 
 
Meter Input Ranges: 0-1 mA, 0-10 mA, 0-100 mA, 0-1 A, 0-5 A With analog output and dual 7 Amp mechanical relays
Accessories
DP40-9SC4
AUD104.00
Availability: 1 week
 
9-pin serial connector for RS485
DP40-25SC4
AUD104.00
Availability: 6 weeks
 
25-pin serial connector for RS485
All amounts shown in AUD
Note:
1. Individual ranges are dip switch selectable.
2. The meter comes factory set at the highest range.
3. RS232 option has been obsoleted.

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Input Type select from:
VRMS for Voltage
CRMS for Current

(2) Options select from:
Nothing(leave field blank) for No Option
-230 for 230 Volt AC Power
-230-A for 230 Volt AC Power with Analog Output
-230-AR for 230 Volt AC Power with Analog Output and Dual 5 Amp Mechanical Relays
-A for Analog Output
-AR for Analog Output with Dual 5 Amp Mechanical Relays
-R for Dual 5 Amp Mechanical Relays
-S4 for RS485 Communications
Note: All combinations may not be valid, check spec sheet for valid part numbers.

Product Manuals:

Download DP25-CRMS and DP25-VRMS - True RMS Meter
Download DP25-CRMS and DP25-VRMS - Serial Communication
Download DP25-CRMS and DP25-VRMS - Quck Start Manual
We noticed you are from the US. Visit your local site for regional offers and live support.