Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

DIN Rail Mount AC Voltage/Current Signal Conditioners, 4-Wire AC Powered Design

DRA-ACT-4 Series

DIN Rail Mount AC Voltage/Current Signal Conditioners, 4-Wire AC Powered Design | DRA-ACT-4 Series

  • DRA-ACT-4I Series AC Current Input
  • DRA-ACT-4V Series AC Voltage Input
  • ± 0.1% Accuracy
  • Isolated
  • 4-20 mA Output
  • Low Profile Enclosure
Signal Conditioners/Transmitters - View related products

Description

The DRA-ACT-4I AND DRA-ACT-4V Series are isolated 4-wire ac current and ac voltage input DIN rail mount signal conditioners that convert the measured input into a proportional, linear and highly accurate 4-20 mA output current. The DRA-ACT-4I Series of ac current input models includes models for 0-1 Aac and 0-5 Aac inputs with a 4-20 mA output. The DRA-ACT-4V Series of ac voltage input models includes models for 0-150 Vac, 0-250 Vac and 0-400 Vac inputs again with a 4-20 mA output. Standard instrument power is 115 Vac, 50/60 Hz. Units can also be configured for optional 230 Vac, 50/60 Hz power. For complete safety, an internal transformer isolates the signal conditioner input from the output thus enabling these units to withstand large momentary inputs. Complete input to output isolation, high surge current capacity and high output signal-to-noise ratio make these signal conditioners highly immune to ground loop signals and RFI. Zero and span trimmers accessible from the front panel of these units facilitate fine tuning.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
DRA-ACT-4I-1
Consult Sales  
Availability: 
 
 
0 to 1 A ac input, 4 to 20 mA output
DRA-ACT-4I-2
Consult Sales  
Availability: 
 
 
0 to 5 A ac input, 4 to 20 mA output
DRA-ACT-4V-1
AUD497.86
Availability: 1 week
 
0 to 150 Vac input, 4 to 20 mA output
DRA-ACT-4V-2
Consult Sales  
Availability: 
 
 
0 to 250 Vac input, 4 to 20 mA output
DRA-ACT-4V-3
AUD495.00
Availability: 1 week
 
0 to 400 Vac input, 4 to 20 mA output
All amounts shown in AUD
Note: * Standard power is 115 Vac, 50/60 Hz. To order unit configured for 230 Vac, 50/60 Hz power, add suffix “-230” to model no., no additional charge. Comes with complete operators manual.
We noticed you are from the US. Visit your local site for regional offers and live support.