Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Ultrasonic Leak Detector - Discontinued

HHLT-1

Ultrasonic Gas Leak Detector | HHLT-1

Ultrasonic Gas Leak Detector

AUD251.00 HHLT-1

CE
  • 20 kHz to 100 kHz
  • For Air or Gas Leaks
  • Economical
  • Applications
  • Pressure And Vacuum System Leak Detection
  • Exhaust System Leaks
  • Tanks, Pipes, Leak Testing, Etc.
  • Steam Trap Inspection
  • Gas Leaks In General
Gas Analysis - View related products

Description

This product is no longer available.


Ultrasonic sound (20 to 100 kHz) is generated by turbulence created by air or a gas forced through a small orifice. Ultrasonic sound is very directional in nature and can be used to pinpoint the exact location of the leak point. Leaking air or gas is generally considered to be viscous flow and as the flow velocity increases, the frequency of the ultrasonic sound emitted will become higher. The HHLT-1R amplifies and converts these sounds to frequencies and levels that the human ear can hear. The HHLT-1T transmitter can supply ultrasonic signals for locations where the gas/air leak does not have sufficient pressure to create an ultrasonic sound. This transmitter will allow the ultrasonic detection of cracks and openings.

Detection Principle
When a gas passes through a restricted orifice under pressure, it’s going from a pressurized laminar flow to low pressure turbulent flow. The turbulence generates a broad spectrum of sound called “white noise”. There are ultrasonic components in this white noise. Since the ultrasound will be loudest by the leak site, the detection of these signals is usually quite simple.

SPECIFICATIONS HHLT-1R Receiver
    Frequency Response: 36 to 44 kHz (centered at 40 kHz)
    Indicator: LED and earphone
    Operating Temperature: 0 to 40°C (32 to 104°F)
    Operating Humidity: <80% RH
    Storage Temperature: -10 to 40°C (14 to 104°F)
    Power Supply: 9V alkaline battery (included)
    Weight: 125.5 g (4.43 oz)
    Dimensions: 150 L x 90 W x 50 mm D (5.9 x 3.5 x 1.97")
HHLT-1T Transmitter
    Frequency: 40 kHz
    Indicator: LED
    Operating Temperature: 0 to 40°C (32 to 104°F)
    Operating Humidity: <80% RH
    Storage Temperature: -10 to 40°C (14 to 104°F)
    Power Supply: 9V alkaline battery (included)
    Weight: 93.5 g (3.30 oz)
    Dimensions: 120 L x 60 W x 38 mm D (4.72 x 2.36 x 1.5")
All amounts shown in AUD
Note: Comes complete with 9V battery and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.