Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Screw Plug Immersion Heaters for Process Water Applications

MTS-1 Series

Immersion Heaters for Process Water Applications | MTS-1 Series

Immersion Heaters for Process Water Applications

AUD1,190.00 MTS-110-3/120V

  • 1 ¼" NPT Stainless Steel Passivated Screw Plug
  • Stainless Steel Passivated Elements
  • High Watt Density (43 to 86 W/in2)
  • 1 to 2 kW
  • Without Thermostat
  • 120 and 240 Volt, Single Phase
  • General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure
Immersion Heaters - View related products

Description

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Controller Section for our selection of process controllers

SPECIFICATIONS
Wattage: 1 to 2 kW
Power: 120 and 240 V, 1 phase
Watt Density: 43 to 86 W/in2
Screw Plug: 1¼ NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moistureresistant/ explosion-resistant enclosure2.



kW Volts W/in2 No. Htg.
Elem.
E1 General Purpose Enclosure1 E2 Moisture Resis/Explosion Resis.2
Dim. B
cm (in)
Model No. Wt.kg (lb) Model No. Wt.kg (lb)
1 120 43 2 15.5 (6 1/8) MTS-110-3/* 0.9 (2) MTS-110-3E2/* 2.3 (5)
1 240 43 2 15.5 (6 1/8) MTS-110-3/* 0.9 (2) MTS-110-3E2/* 2.3 (5)
1.2 120 53 2 15.5 (6 1/8) MTS-112/* 0.9 (2) MTS-112E2/* 2.3 (5)
1.2 240 53 2 15.5 (6 1/8) MTS-112/* 0.9 (2) MTS-112E2/* 2.3 (5)
1.5 120 65 2 15.5 (6 1/8) MTS-115/* 0.9 (2) MTS-115E2/* 2.3 (5)
1.5 240 65 2 15.5 (6 1/8) MTS-115/* 0.9 (2) MTS-115E2/* 2.3 (5)
2 120 86 2 15.5 (6 1/8) MTS-120/* 0.9 (2) MTS-120E2/* 2.3 (5)
2 240 86 2 15.5 (6 1/8) MTS-120/* 0.9 (2) MTS-120E2/* 2.3 (5)
* Designate voltage, i.e., "120" for 120 Vac or "240" for 240 Vac.
1 Heaters with general purpose enclosures are UL Listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
E1 General Purpose Enclosure1
Heaters with general purpose enclosures are UL Listed and CSA certified.
MTS-110-3E2/120
AUD1,770.00
Availability: 6 weeks
 
1 kW/120 VAC/43 W/in^2
MTS-110-3/120V
AUD1,190.00
Availability: 6 weeks
 
1 kW/120 VAC/43 W/in^2
MTS-110-3/240V
Consult Sales  
Availability: 
 
 
1 kW/240 VAC/43 W/in^2
MTS-120/120
AUD1,275.00
Availability: 6 weeks
 
2 kW/120 VAC/86 W/in^2
MTS-120/240
AUD1,275.00
Availability: 6 weeks
 
2 kW/240 VAC/83 W/in^2
E2 Moisture Resis/Explosion Resis.2
Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
MTS-110-3E2/120
AUD1,770.00
Availability: 6 weeks
 
1 kW/120 VAC/43 W/in^2
MTS-110-3E2/240
Consult Sales  
Availability: 
 
 
1 kW/240 VAC/43 W/in^2

Order By Part Number

Part Number
Qty
Part Number
Qty


All amounts shown in AUD
Ordering Example: (1) MTS-120/240 2 kW heater powered by 240 Vac, AUD1,275.00
We noticed you are from the US. Visit your local site for regional offers and live support.