Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Handheld Pressure Calibrator with Integral Electric Pressure Pump

PCL819 Series

Handheld Pressure Calibrator, Electric Pressure Pump | PCL819 Series

Handheld Pressure Calibrator, Electric Pressure Pump

CE
  • Internal Electric Pressure Pump Generates Pressure from -0.8 to 20 bar (-12 to 300 psi)
  • Accuracy to 0.025% FS
  • Source and Measure 4 to 20 mA
  • 24 Vdc Loop Power Supply to Power Device Under Test
  • Rugged, Compact Design, Just 1.2 kg (2.5 lb)
  • Operates on 8 Standard “AA” Alkaline Batteries
  • Pt100 RTD Input for Temperature Measurement
  • Accepts All PCL-PM Series External Pressure Modules (PCL-PMA Module Adaptor Required)
  • Large Graphic Style LCD with Backlight Can be Configured to Display Up to 3 Inputs Simultaneously
  • 15 User Selectable Pressure Units
Instrumentation for Pressure and Strain Measurements - View related products

Description

OMEGA’s PCL819 combines a high performance handheld pressure calibrator with an integral electric pressure pump in a small, lightweight, handheld unit. Before this innovation, users had to manually generate pressure using cumbersome manual pumps or large, heavy boxes with limited portability and battery life. The PCL819 is only slightly larger than the PCL340 series and weighs in at a mere 1.2 kg (2.5 lb). The housing is easily contoured to fit a technicians hand with good balance top to bottom. The internal pump can generate vacuum or pressure from -12 to 300 psig. The PCL819 has an internal isolated pressure sensor with 0.025% of full scale accuracy and comes in three gauge and two absolute pressure ranges. It is also compatible with the PCL-PM series external pressure modules which come in ranges from 5 to 5000 psig and also differential, absolute and compound ranges. A PCL-PMA module adaptor is required to use external modules. In addition to pressure the unit also has an input for Pt100 RTD sensors for temperature and can measure and simulate 4 to 20 mA current loops. The large LCD graphic display can be configured to display up to 3 variables at the same time by the user. It provides a number of convenience features such as switch testing, percent error, and a damping function. Up to 5 frequently used configuration can be stored and retrieved with one button recall.

SPECIFICATIONS
Accuracy:
    Pressure: ±0.025% FS from 15 to 35°C (59 to 95°F) (add 0.002%/°C outside of 15 to 35°C)
    mA: ±0.015% of reading ±2 counts (simulation and measurement)
    Volts: ±0.015% of reading ±2 counts (measurement only)
    Temperature: ±0.1°C (0.2°C) (measurement only)
Operating Temperature: -10 to 50°C (14 to 122°F)
Storage Temperature: -20 to 60°C (-4 to 160°F)
Internal Pump: Electrically operated pneumatic pump generates -0.8 to 20 bar (-12 to 300 psi)
Batteries: 8 “AA” Alkaline batteries (included)
Battery Life: 100 pump cycles to 300 psi or 1000 cycles to 30 psi minimum
Pressure Connection: 1/8 NPT female
Electrical Connection: Standard banana jacks
RTD Connection: 4 pin LEMO style
External Module: 6 pin LEMO style
Dimensions: 200 H x 100 W x 60 mm D (8 x 4 x 23/8")
Weight: 1.2 kg (2.5 lb)
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
PCL819-30
Consult Sales  
Availability: 
 
 
Range; -0.8 to 2 bar (-12 to 30 psi), Type; Gage
PCL819-150
Consult Sales  
Availability: 
 
 
Range; -0.8 to 10 bar (-12 to 150 psi), Type; Gage
PCL819-300
Consult Sales  
Availability: 
 
 
Range; -0.8 to 20 bar (-12 to 300 psi), Type; Gage
PCL819-30A
AUD6,865.00
Availability: 1 week
 
Range; 0 to 2 bar (0 to 30 psi), Type; Absolute
PCL819-150A
Consult Sales  
Availability: 
 
 
Range; 0 to 10 bar (0 to 150 psi), Type; Absolute
All amounts shown in AUD
Note: Comes complete with operator’s manual, 8 “AA” batteries, test leads, test hose, dirt trap, fittings, calibration certificate, and carrying case.
  
We noticed you are from the US. Visit your local site for regional offers and live support.