Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Diffused Semiconductor Pressure Transducer
Rugged Aerospace Design

PX6000-5V

Diffused Semiconductor Pressure Transducer | PX6000-5V

Diffused Semiconductor Pressure Transducer

CE
  • High Reliability
  • Long Term Stability
  • All Stainless Steel Case
  • Vacuum Range Available
  • 5 Point NIST Calibration Certificate Included
Pressure Transducers - View related products

Description

OMEGA’s PX6000 pressure transducer fits easily into your application. This low-cost transducer is small and light, and mounting requires no bulky structures.You select from 3 electrical terminations and 6 pressure fittings. The sensor is a small [about 2.5 mm (0.1")] square silicon chip with 4 diffused strain gages, mounted in the stainless steel case. Laser-trimmed resistors provide temperature compensation and adjust zero balance and span. The 0 to 5 Vdc output is compatible with most control and data acquisition systems.

The PX6000 Series uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and the pressure medium. The sensor is less sensitive to vibration and more dependable in high-shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.

The PX6000 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-25 bar pressure ranges. Please see the PXM6000 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
Excitation: 12 to 40 Vdc unregulated
Output: 0 to 5 Vdc ±0.1 Vdc adjustable ±10% FSO
Input Current: 15 mA max with no load
Output Resistance: Less than 200 Ω
Zero Balance: 0V ±0.1 Vdc Adjustable ±5% FSO
Dielectric Isolation Resistance: 100 MΩ minimum at 45 Vdc applied between the case or a conductive medium and the bridge circuit
Sensing Element: 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor, thin-film media and dielectric isolation barriers
Temperature Sensor: 900 to 1500 Ω Output resistance @ 24°C (75°F)
Temperature Coefficient: 8% min, 10% max per 55.5°C (100°F)
Accuracy: ±0.25% FSO for all ranges (Combined linearity, hysteresis and repeatability)
Operational Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: -18 to 82°C (0 to 180°F)
Thermal Effects:
   Span: ±0.03% FSO/°F (0.054%/°C)
   Zero: ±0.03% FSO/°F (0.054%/°C)
Vibration Sensitivity: At 20 g peak sinusoidal vibration from 10 Hz to 2000 Hz (1/2" D.A.), the output shall not exceed 0.04% FSO/g for 1 bar (15 psi) range to 0.005% FSO/g for 7 bar (100 psi) and above
Natural Frequency: Greater than 35 kHz for 7 bar (100 psi) and above
Shock: 100 g, 11 ms half sine wave without damage
Proof Pressure: 2 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3 times rated pressure for pressure ranges below 14 bar (200 psi), or 2.5 times rated pressure for pressure ranges above 14 bar (200) psi will not cause rupture of the pressure sensor
Wetted Parts: 316 stainless steel, silicon, Pyrex® glass, epoxy, Kovar®
Electrical Connection:
   Style "0": 0.6 m (2 ft) cable
   Style "1": PTIH-10-6P connector
   Style "3": 4-pin eyelet header
   Style "6": mini DIN connector
Pressure Port:
   Style "A": 1/8-27 NPT, male
   Style "B": 1/8-27 NPT, female
   Style "C": 1/4-18 NPT, male, standard
   Style "D": 1/4-18 NPT, female
   Style "L": MS33656-4, male
   Style "M": MS33649-4, female
Weight: 170 g (6 oz) typical
Mating Connector (Style 1): PTS06A-10-6S (sold separately)
For special options consult Sales or Pressure Engineering.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Models with 1/4 NPT Pressure Port
PX6000C1-30VAC5T
Consult Sales  
Availability: 
 
 
30 to 0 (in Hg) Vacuum range transducer with 0-5 Vdc output
PX6000C1-015A5T
Consult Sales  
Availability: 
 
 
0-15 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000C1-020A5T
Consult Sales  
Availability: 
 
 
0-20 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000C1-050A5T
Consult Sales  
Availability: 
 
 
0-50 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000L1-100A5T
Consult Sales  
Availability: 
 
 
0-100 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000C1-200A5T
Consult Sales  
Availability: 
 
 
0-200 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000C1-300A5T
Consult Sales  
Availability: 
 
 
0-300 psi Absolute Pressure transducer with 0-5 Vdc output
PX6000C1-015G5T
Consult Sales  
Availability: 
 
 
0-15 psi Gage Pressure transducer with 0-5 Vdc output
PX6000C1-020G5T
Consult Sales  
Availability: 
 
 
0-20 psi Gage Pressure transducer with 0-5 Vdc output
PX6000C1-050G5T
Consult Sales  
Availability: 
 
 
0-50 psi Gage Pressure transducer with 0-5 Vdc output
PX6000C1-100G5T
Consult Sales  
Availability: 
 
 
0-100 psi Gage Pressure transducer with 0-5 Vdc output
PX6000C1-200G5T
Consult Sales  
Availability: 
 
 
0-200 psi Gage Pressure transducer with 0-5 Vdc output
PX6000C1-300G5T
Consult Sales  
Availability: 
 
 
0-300 psi Gage Pressure transducer with 0-5 Vdc output
Accessories
PTS06A-10-6S
Consult Sales  
Availability: 
 
 
Mating connector (sold separately)
All amounts shown in AUD
Note: Metric Ranges Available - Consult Engineering
Ordering Example: (1) PT06F10-6S mating connector (sold separately), AUD65.77 

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Pressure Port select from:
L for MS33656-4 Male
M for MS33649-4 Female
A for 1/8-27 NPT Male
B for 1/8-27 NPT Female
C for 1/4-18 NPT Male
D for 1/4-18 NPT Female

(2) Electrical Connection select from:
1 for PT1H-10-6P Connector or equal (no charge) (mating connector not included)
0 for 2' (6m) cable (std) +2$/ft over 2'
3 for 4-pin Eyelet Header (no charge)

(3) Range select from:
30 for 30 to 0 in-Hg (Vacuum only)
015 for 0-15 psi
020 for 0-20 psi
050 for 0-50 psi
100 for 0-100 psi
200 for 0-200 psi
300 for 0-300 psi

(4) Units select from:
VAC for Vacuum Model
G for Gage Model
A for Absolute Model

(5) Output select from:
5T for 0 to 5 Vdc Output
V for mV/V Output
I for 4 to 20mA Output

(6) Options select from:
for No Options
-CAL11 for 11 point NIST Calibration($250.00 extra)
-xxFT for Extra length of cable $2/ft over 3ft
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.