Cart  |  Contact  |  Help  | 
Toll-Free in Australia:1800 106 210
International+65 6415 5353

Your Source for Process Measurement & Control

High Pressure Solenoid Valve

SVH-110

High Pressure Solenoid Valve | SVH-110 |Fuel Cell Valve | High Pressure Valve | SVH-110
New

AUD895.00 SVH-111

  • Stainless Steel Construction
  • NEMA 4 and 7
  • Pressures up to 10,000 psi (Depending on Model)
Valves - View related products

Description

The SVH-110 Series direct acting solenoid valves are normally closed valves that open when energized and close when de-energized. When the coil is energized the plunger lifts the piston off the valve seat, opening the valve. Upon de-energizing the coil, a spring closes the piston to seat it. The normally open valve operates similarly, closing when energized and opening when de-energized. No minimum pressure is required. The SVH-110 Series are used to control the flow of high pressure air, water, hydrogen, nitrogen and other gases or light liquids compatible with materials of construction. They are also suitable for cryogenic applications.

Specifications
Materials of Construction
Fluid Shipping Weight: 48 oz (3 lb)
Temperature: -212 to 204°C (-350 to 400°F)
Valve Body: 316 SS
Piston/Seal: 303 SS/FEP
O-Ring Seal: FEP
Spring: 302 SS
Plunger: 430 SS
Bonnet: 316 SS/430 SS
Bonnet Retainer: 430 SS
Port Connections: ¼ NPT
Cv: 0.005 (SVH-111), 0.02 (SVH-112)
Electrical
Power: 22 Watts
AC Inrush: 2.5 Amp @ 120 Vac
AC Holding: 0.2 Amp at 120 Vac
Insulation: Class “H”
Duty: Continuous
Enclosure: NEMA 4 and 7(optional)
Connection: ½ NPT, 457 mm (18") leads
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
SVH-111 Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 120 Vac, Port Diameter mm (inch) 0.48 (0.019), Maximum Pressure 10,000 psig
SVH-111-24A Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 24 Vac, Port Diameter mm (inch) 0.48 (0.019), Maximum Pressure 10,000 psig
SVH-111-240A Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 240 Vac, Port Diameter mm (inch) 0.48 (0.019), Maximum Pressure 10,000 psig
SVH-111-24D Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 24 Vdc, Port Diameter mm (inch) 0.48 (0.019), Maximum Pressure 5000 psig
SVH-111-120D Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 120 Vdc, Port Diameter mm (inch) 0.48 (0.019), Maximum Pressure 5000 psig
SVH-112 Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 120 Vac, Port Diameter mm (inch) 0.81 (0.032), Maximum Pressure 4000 psig
SVH-112-24A Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 24 Vac, Port Diameter mm (inch) 0.81 (0.032), Maximum Pressure 4000 psig
SVH-112-240A Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 240 Vac, Port Diameter mm (inch) 0.81 (0.032), Maximum Pressure 4000 psig
SVH-112-24D Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 24 Vdc, Port Diameter mm (inch) 0.81 (0.032), Maximum Pressure 2000 psig
SVH-112-120D Star
AUD895.00
Availability: 6 weeks
 
Coil Voltage 120 Vdc, Port Diameter mm (inch) 0.81 (0.032), Maximum Pressure 2000 psig
All amounts shown in AUD
Note: Comes complete with operator’s manual.

For units for Hydrogen service (Helium leak test), add suffix “-HY” to the model number; add $32.00 to the price.

For Normally Open valve configuration, add suffix "-NO” to the model number (Only available on AC powered units); add $53 to the price.

For Oxygen cleaned units, add suffix “-OX” to the model number; add $53 to the price.

For units with Straight Thread J1926 with O-ring seal, add suffix “-ST” to the model number; add $53 to the price.

For units to be installed in any orientation, add suffix "-UM” to the model number, add $32 to the cost.

For units with a NEMA 7 enclosure, add suffix "-NEMA7” to the model number, add $100 to the cost.