Cart  |  Contact  |  Help  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

3 1/2 Digit Mini-size Process Meter


Process Meter, Low Cost - Omega | DPF50

Process Meter, Low Cost - Omega

  • Easy to Use and No Programming Required
  • Zero and Span Adjustments of 2,000 Counts Each
  • ±1,999 Count Display Span
  • 120 dB CMR, 56 dB NMR
  • Bright, 14.2 mm (0.56") LED Display
  • EMI/RFI Filter for ac Power
  • Removable Screw-Clamp Connector
  • Miniature DIN Case with 24 x 72 mm (0.94 x 2.83") Bezel Options
  • Isolated Transmitter Excitation Supply
  • 4-20 mA, 1-5 V, 0-10 V Signal Ranges
  • Red or Green LED Display
  • 24 Vac Power Supply
  • 25 x 75 mm (0.98 x 2.96") Bezel Adaptor
  • NEMA-4 Splash-Proof Lens Cover
Instrumentation for Pressure and Strain Measurements - View related products


Large Display, Small Case
The DPF50 Series provides a full-size 14.2 mm (0.56"), red or green LED display, yet is housed in a miniature case with a 24 x 72 mm (0.94 x 2.83") bezel. The case fits into a standard 3 //64 DIN cutout, 22.2 x 68 mm (0.87 x 2.68") and requires a depth of less than 120 mm (4.72") behind the panel, including plug-in screw-clamp connectors (standard).
Built-In Isolated Excitation
Model DPF52 is a low-cost 3 1 /2 digit (±1,999-count) process meter with a built-in, isolated excitation supply to power two- or four-wire transmitters, bridges or active transducers. Output levels of 24 Vdc at 20 mA or 10 Vdc at 30 mA are jumper-selectable.
Easy To Scale
The DPF50 Series can be shipped fully calibrated to meet a customer’s specific requirements (DPF50-FSE). Five signal ranges can be selected via push-on jumpers, and precision potentiometers are readily accessible behind the lens to provide zero and span adjustments of 2000 counts each. Accuracy is 99.9% of reading.
Multiple Power Options
The DPF50 Series incorporates a power supply, which is available for 24, 100, 115 or 230 Vac OR 7-32 Vdc power. All power options provide EMI filtering, so that power line noise does not affect the reading.

For full product specifications view pdf file in "Related Links" below

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Place Order(Specify Model Number)
Part Number/ Desc.
Quick Ship
Consult Sales  
Scalable display with 24 Vdc excitation, factory set for 4-20 mA input = 0.000 to 100.0 display
Quick Ship
Consult Sales  
Fixed range dc voltmeter, ±199.9 mV input = ±199.9 display
All amounts shown in AUD
Note: Scalable meters are factory set for a full scale display range of 000.0 to 100.0 unless customer specified at time of order.

Part Number Builder

Build Your Part Number Below
Option Descriptions:

(1) Meter Type select from:
DPF52- for scalable meter
DPF53- for scalable meter
DPF56- for scalable meter
DPF57- for scalable meter

(2) Input Options select from:
PA1 for without excitation 4-20 mA input
PV2 for without excitation 0-199.9 mV input
PV3 for without excitation 1-5 Vdc input
PV4 for without excitation 0-10 Vdc input
PV5 for without excitation 0-100 Vdc input
FSP for without excitation customer specified scaling
EA1 for with 24 Vdc excitation 4-20 mA input
EV2 for with 24 Vdc excitation 0-199.9 mV input
EV3 for with 24 Vdc excitation 1-5 Vdc input
EV4 for with 24 Vdc excitation 0-10 Vdc input
EV5 for with 24 Vdc excitation 0-100 Vdc input
FSE for with 24 Vdc excitation customer specified scaling
AV2 for fixed range dc voltmeter ±199.9 mV
AV3 for fixed range dc voltmeter ±1.999 V
AV4 for fixed range dc voltmeter ±19.99 V
AV5 for fixed range dc voltmeter ±199.9 V

(3) Power Options select from:
for 115 Vac 50-60 Hz power leave blank
-230 for 230 Vac 50-60 Hz power
-100V for 100 Vac 50-60 Hz power
-24VAC for 24 Vac 50-60 Hz power
-7/32 for 7 to 32 Vdc power

(4) Display Color select from:
for red display leave blank
-GR for green display
Note: All combinations may not be valid, check spec sheet for valid part numbers.

Product Manuals:

Download DPF50 - 3/64 DIN Process Meter Quick Start