Ultrasonic Flow Meter - Discontinued Replaced by FDT-25

FDT-21

Ultrasonic Flow meter

PLACE ORDER

Accuracy 1%
Repeatability 0.2%
Positive, Negative and Net Totalizer
4-Line LCD Display
Clamp On Transducers
RS232 Output

Description

FDT-21 ultrasonic flow meter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a handheld measurement system which is both easy to install and use. The FDT-21 operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next.

Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The FDT-21 can be used for metallic, plastic and rubber tubes.

SPECIFICATIONS
Accuracy: ±1% of reading >(0.2m/s) 0.6 ft/s
Repeatability: 0.2%
Linearity: 0.5%
Response Time: 0 to 999 seconds (user configured)
Velocity: (±0.01 to 30 m/s) ±0.03 to 105 ft/s bi-directional
Temperature Range:
Standard: 0 to 70°C (32 to 158°F)
With High Temp Transducers: 0 to 160°C (32 to 320°F)
Pipe Size: DN 19 to 100 mm (0.75 to 4") standard [up to DN 6000 mm (236") with optional transducers]
Transducer Frequency: 1 MHz
Rate Units (User Configured): Meter, feet, cubic meter, cubic feet, USA gallon, liter, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons
Totalizer: 7-digit totals for positive, negative and net flow
Liquid Types: Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, and more
Suspension Concentration: .20,000 ppm (may contain very small amounts of air bubbles)
Pipe Material: All metals, most plastics and fiberglass
Security: Programmable lock-out code
Display: 4 x 16 english letters
Communications: RS232C (baud rate from 75 to 115,200 bps)
Transducer Cable Length: 5 m (15')
Power: 3 "AAA" Ni-H built-in batteries (included) with 90 to 230 Vac charger, fully charged lasts over 12 hrs.
Data Logger: Built-in, stores over 2000 lines of data
Totalizer/Calibration: 7-digit press-to-go for calibration
Housing: ABS plastic with aluminum alloy protective carrying case
Case: NEMA-4 (IP65)
Dimensions: 100 H x 66 W x 20 mm D (3.9 x 2.6 x 0.8")
Weight: 514 g (1.2 lb)

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.

Qty

Description

FDT-21

Consult Sales

Availability:

Handheld transit-time ultrasonic flowmeter (includes S2H transducers)

Accessories

FDT-21-S2H

Consult Sales

Availability:

Replacement generation 2 small pipe transducer 94g (3.32oz)

FDT-21-HM

AUD1,411.99

Availability: 1 week

Medium pipe transducer

FDT-21-M2H

AUD800.50

Availability: 1 week

Medium pipe high temp transducer 259g (9.1oz)

FDT-21-L2H

AUD800.50

Availability: 1 week

Large pipe high temp transducer

FDT-21-GREASE-S1

AUD181.01

Availability: 1 week

Acoustic gel for standard transducers

FDT-21-GREASE-S1H

AUD229.03

Availability: 1 week

Acoustic gel for high-temperature transducers

FDT-21-CLAMP1

AUD41.50

Availability: 1 week

(Replacement) Transducer pipe clamp set for up to DN100 (4")

FDT-21-CLAMP2

AUD78.00

Availability: 1 week

Transducer pipe clamp set for up to DN200 (8")

FDT-21-CLAMP3

Consult Sales

Availability:

Transducer pipe clamp set for up to DN300 (12")

FDT-21-CLAMP4

Consult Sales

Availability:

Transducer pipe clamp set for up to DN400 (16")

FDT-21-CLAMP5

AUD166.00

Availability: 1 week

Transducer pipe clamp set for up to DN500 (20")

FDT-21-CLAMP6

AUD187.89

Availability: 1 week

Transducer pipe clamp set for up to DN600 (24")

FDT-21-UPS

AUD79.49

Availability: 1 week

Universal power supply

FDT-21-15M-TRANSDUCERCABLE

Consult Sales

Availability:

15 Meter set of transducer cables

† All amounts shown in AUD
Note: Comes complete with 3 "AAA" batteries, small pipe standard/high temperature (S2H)transducer, acoustic gel, tape measure, plug-in 120Vac charger, RS232 cable, transducer cable, rugged carrying case and operator’s manual.