Economical OEM Style Single Point Load Cells - Discontinued

LCAE

Single Point Load Cells can be used as a Weight Sensor

Single Point Load Cell Simplifies Scale Design and Reduces Cost
Moisture Resistant for Use in Damp Environments
Aluminum Construction
Available in Ranges from 600 Grams to 200 Kilograms

Description

The LCAE series has been discontinued. Please see the LC60 as a possible alternative or contact our Pressure Engineering department.

OMEGA’s LCAE series is a low cost, highly accurate, single point load cell, ideal for OEM applications such as electronic scales and weighing machines. The single point design is highly resistant to eccentric loading, allowing direct mounting to the scale base and weighing platform. The LCAE series features a moisture-proof sealant and is available in ranges from 600 grams to 200 kilograms.

SPECIFICATIONS
Full Scale Output (User Must Calibrate to Eliminate 10% Tolerance): 2 mV/V ±10% (1 mV/V ±10% <6 kg)
Excitation: 10 Vdc (15 Vdc max)
Non-Linearity: ±0.015% FS (0.02% <6 kg)
Hysteresis: ±0.015% FS (0.02% <6 kg)
Non-Repeatability: ±0.02% FS
Zero Balance: ±5% FS
Creep/Creep Recovery: 0.02% FS
Operating Temperature: -10 to 50°C (14 to 122°F)
Compensated Temperature: -10 to 50°C (14 to 122°F)
Temp Effect:
Zero: ±0.0022% FS/°F
Span: ±0.0007% rdg/°F
Bridge Resistance: 350 Ω
Safe Overload: 150% rated capacity (300% <6 kg)
Ultimate Overload: 200% rated capacity (400% <6 kg)
Construction: Aluminum
Cable: 0.6 m (26") 4-conductor cable

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

LCAE-600G

Consult Sales

Availability:

Aluminum single point load cell, 0-600 g capacity

LCAE-1KG

Consult Sales

Availability:

Aluminum single point load cell, 0-1 kg capacity

LCAE-3KG

Consult Sales

Availability:

Aluminum single point load cell, 0-3 kg capacity

LCAE-35KG

Consult Sales

Availability:

Aluminum single point load cell, 0-35 kg capacity

LCAE-60KG

Consult Sales

Availability:

Aluminum single point load cell, 0-60 kg capacity

† All amounts shown in AUD
Note: LCAE load cells must be calibrated by the end user.