Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

96-Bit and 48-Bit High Current Digital I/OBoards for the PCI Bus

PCI-DIO96H and PCI-DIO48H

96-Bit and 48-Bit High Current Digital I/OBoards for the PCI Bus | PCI-DIO96H and PCI-DIO48H

CE
  • 48 or 96 High Current Digital I/O Bits
  • High Drive Output (64 mA Sink, 15 mA Source)
  • Fully Plug-and-Play

Description

The PCI-DIO96H and PCI-DIO48H are high density, logic level, digital I/O boards for IBM or compatible PC’s with a PCI bus. The PCI-DIO96H offers 96 bits of digital I/O, while the PCI-DIO48H has 48. For both boards, the I/O, in 24-bit groups, is based on an 82C55, mode 0 emulation. Each group provides an 8-bit port A and port B, as well as an 8-bit port C that can be split into a 4- bit port C-HI and a 4-bit port C-LO. The digital output drivers are 74S244 chips, and provide 64 mA sink and 15 mA source output capabilities. The input buffers are 74LS373 and offer the high standard input impedance of the 74LS series. On power up and reset, all I/O bits are set to input mode. Like all members of the 74LS series, unconnected inputs will typically float high. If you are using the board to control items that must be OFF on reset, you will need to install pull-down resistors. Provisions have been made on the board to allow users to install SIP resistor networks quickly and easily in either pull-up or pull-down configurations.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.
Qty
Description
  
PCI-DIO48H
Consult Sales  
Availability: 
 
 
48-bit, high current, logic level digital I/O board for PCI bus
  
PCI-DIO96H
Consult Sales  
Availability: 
 
 
96-bit, high current, logic level digital I/O board for PCI bus
  
CIO-ERB48
Consult Sales  
Availability: 
 
 
48-channel relay rack with 6 amp, form C relays (see Section H for details)
  
CIO-MINI50
AUD241.00
Availability: 1 week
 
50-pin, screw terminal board (one required for PCI-DIO48H, two required for PCI-DIO96H)
Click to expand/minimize a list of what others bought with theC50FF-2
C50FF-2
Consult Sales  
Availability: 
 
 
50-pin ribbon cable, 2' long (use for PCI-DIO48H)
Click to expand/minimize a list of what others bought with theC100FF-2
C100FF-2
Consult Sales  
Availability: 
 
 
100-pin ribbon cable, 2' long. Splits 100-pin connector into two 50-pin connectors (one is required for PCI-DIO96H)
Click to expand/minimize a list of what others bought with theUNIV-DRVR
UNIV-DRVR
Consult Sales  
Availability: 
 
 
Universal Software Library
Click to expand/minimize a list of what others bought with theCIO-LABVIEW-DRVR
CIO-LABVIEW-DRVR
Consult Sales  
Availability: 
 
 
LabVIEW drivers
All amounts shown in AUD
Note: The PCI-DIO series comes with InstaCal test software and a complete operator’s manual
We noticed you are from the US. Visit your local site for regional offers and live support.