Rugged Clean Water Immersion Heater—2" NPT Brass Fitting

ARMT-2 Series

Water Immersion Heater

^AUD1,750.00 ARMT-2155/120V

PLACE ORDER

Ideal For Clean Liquids within pH 6 to pH 8 Range
Quality Construction with Copper Sheath
Models Available with 120V, 208V, 240V, or 480V, 1 Phase Power
Integral Thermostat

Immersion Heaters - View related products

Description

The OMEGALUX™ ARMT-2 Series clean water immersion heater feature 2" NPT brass fitting screw plug for direct heating of the process fluid in your tank or vessel. Tested design characteristics assure years of dependable performance.

Please Note: The integral thermostat functions as a temperature control only. This is not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See the Temperature Section for our full selection of control devices.

CAUTION AND WARNING! Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

T-2 Temp.Range (60°-250°F) Model No.	T-1 Temp.Range (0°-100°F) Model No.	kW	Phase	W/in2	No. Elem.	Dim. B in (cm)
ARMT-2155/*	ARMT-2155T1/*	1.5	1	48	1	12 (30)
ARMT-2205-3/**	ARMT-2205-3T1/**	2	1	51	2	8 (20)
ARMT-2255/***	ARMT-2255T1/***	2.5	1	48	2	91/2 (20)
ARMT-2305/**	ARMT-2305T1/**	3	1	48	2	12 (30)
ARMT-2405/***	ARMT-2405T1/***	4	1	48	2	18 (46)
ARMT-2505/***	ARMT-2505T1/***	5	1	53	2	19 13/16 (39)
ARMT-2605/***	ARMT-2605T1/***	6	1	47	2	251/8 (64)
ARMT-2705/***	ARMT-2705T1/***	7	1	49	2	28 (71)
ARMT-2105/***	ARMT-2105T1/***	10	1	46	2	40 1/2 (103)
ARMT-2125/240	ARMT-2125T1/240	12	1	46	2	48 (122)
ARMT-2125/480	ARMT-2125T1/240	12	1	46	2	48 (122)
ARMT-21505/240	ARMT-21505T1/240	15	1	50	2	54 (137)

/* Designate voltage; 120, 208, 240 VAC.
/** Designate voltage; 120, 208, 240 480 VAC.
/*** Designate voltage; 208, 240 480 VAC.
To order the unit with the optional E2 enclosure, insert E2 into the part number as shown, ARMT-2255E2T1/240.
* E2 enclosure not intended for use in hazardous areas.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

ARMT-2205-3E2/480V

AUD2,350.00

Availability: 6 weeks

2kW heater powered by 480 Vac

ARMT-2505/240V

AUD2,145.00

Availability: 6 weeks

5kW heater powered by 240Vac

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

		(1)		(2)	(3)	(4)		(5)
ARMT-	2		5				/

Option Descriptions:

(1) kW select from:
15 for 1.5 kW
20 for 2 kW
25 for 2.5 kW
30 for 3 kW
40 for 4 kW
50 for 5 kW
60 for 6 kW
70 for 7 kW
10 for 10 kW
12 for 12 kW
150 for 15 kW

(2) P/N ARMT-2205-3/** & ARMT-2205-3T1/** select from:
Nothing(leave field blank) for Valid for all p/n except ARMT-2205-3/** & ARMT-2205-3T1/**
-3 for Only valid for ARMT-2205-3/** & ARMT-2205-3T1/**

(3) Enclosure select from:
Nothing(leave field blank) for General Purpose NEMA-1 rated
E2 for Moisture Tight/Explosion Resistant

(4) Temperature Range select from:
Nothing(leave field blank) for Temp Range (60 to 250°F)
T1 for Temp Range (0 to 100°F)

(5) Voltage select from:
120V for 120 Vac
208V for 208 Vac
240V for 240 Vac
480V for 480 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.