Immersion heaters, Incoloy Sheath—2" NPT fitting

ARMTI-2 Series

Screw Plug Immersion heaters

The Ideal Immersion Heater for Severe, Hard Water pH 5 to 9
Integral Thermostat
2" NPT Stainless Steel Fitting with 2 Heating Elements
Available with NEMA-1 Rated General Purpose Enclosure, or Explosion Resistant Enclosure
240 or 480 V, 1 Phase Power
46 to 51 W/in² Watt Density

Immersion Heaters - View related products

Description

Please Note: The integral thermostat functions as a temperature control only. This is not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See Section P for our selection of control devices.

SPECIFICATIONS
Wattage: 2 to 15 kW Power: 240, or 480V: 1 phase Sheath: 475" diameter Incoloy Screw Plug: 2" NPT Stainless Steel Thermostat: Bulb and capillary Enclosure: General Purpose, NEMA-1 rated, or type E2 moisture resistant/explosion resistant enclosure.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

ARMTI-2705T1/480V

AUD3,610.00

Availability: 6 weeks

7 kW, 480 Vac, with a General Purpose Terminal Enclosure

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

	(1)	(2)		(3)
ARMTI-2			/

Option Descriptions:

(1) Wattage select from:
205-3 for 2 kW
255 for 2.5 kW
305 for 3 kW
405 for 4 kW
505 for 5 kW
605 for 6 kW
705 for 7 kW
1005 for 10 kW
1205 for 12 kW
1505 for 15 kW

(2) Temperature Range and Enclosure Style select from:
Nothing(leave field blank) for 60-250°F with a General Purpose Terminal Enclosure
T1 for 0-100°F General Purpose Terminal Enclosure
E2 for 60-250°F with a Moisture Resistant/Explosion Resistant Enclosure
E2T1 for 0-100°F with a Moisture Resistant/Explosion Resistant Enclosure

(3) select from:
240V for 240 Vac
480V for 480 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.