Clean Water Immersion Heater with Integral Thermostat, 1" NPT Fitting

ARTM Series

Tank Heater

^AUD620.00 ARTM-750TL/240V

PLACE ORDER

1" Brass Screw Plug
Copper Sheath for Clean Water Applications
Integral Bulb and Capillary Thermostat— 3 Temperature Ranges Available
U.L. Listed with General Purpose NEMA-1 Rated Enclosure

Immersion Heaters - View related products

Description

ARTM Series screw plug immersion heaters are designed for direct contact heating in clean water applications. Please Note: The integral thermostat functions as a temperature control only. this not a fail safe device. An approved pressure or temperature control should be used with these heaters to assure safe operation. See section P for our full selection of control devices.

SPECIFICATIONS
Wattage: .75 to 3 kW Power: 120 or 240 VAC, 1 phase Sheath: 0.315" (.800 cm) diameter copper Screw Plug: 1" NPT brass Thermostat: bulb and capillary type, 3 temperature ranges available; 60-187°F, 60-240°F, or 0-127°F Watt Density: 64-68 W/in2 Enclosure: General Purpose NEMA-1; optional moisture tight/explosion resistant

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.

Qty

Description

ARTM-750TL/240V

AUD620.00

Availability: 6 weeks

Temp.Range 0-127F,.75kW.,240Vac

ARTM-1500TL/240V

AUD720.00

Availability: 1 week

Temp.Range 0°-127° F, 1.5 kW, 240 Vac

ARTM-2000E2/120V

AUD1,200.00

Availability: 6 weeks

Temp.Range 60-187F, 2kW, 120Vac

ARTM-2000TL/120V

AUD745.00

Availability: 6 weeks

Temp.Range 0-127F, 2kW, 120 Vac

ARTM-3000TH/240V

AUD765.00

Availability: 6 weeks

Temp.Range 60°-240° F, 3 kW, 240 Vac

† All amounts shown in AUD
Note: For More details click on Download at the bottom of this page under Related Links

Part Number Builder

Build Your Part Number Below

	(1)	(2)	(3)		(4)
ARTM-				/

Option Descriptions:

(1) Wattage select from:
750 for .75 kW
1000 for 1.0 kW
1250 for 1.25 kW
1500 for 1.5 kW
2000 for 2.0 kW
2500 for 2.5 kW
3000 for 3.0 kW

(2) Enclosure select from:
Nothing(leave field blank) for General Purpose Terminal Enclosure (Standard)
E2 for Moisture Tight/Explosion Resistant Enclosure

(3) Temperature Range select from:
Nothing(leave field blank) for 60°-187°F
TH for 60°-240°F
TL for 0°-127°F

(4) Voltage select from:
120V for 120 Vac
240V for 240 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.