Booster Heater-Corrosion Solution Applications

CVCHS Series

^AUD4,765.00 CVCHS-01-01P5-E1/120V

PLACE ORDER

Non-Metallic (CPVC) Pipe Body
1.5 - 3 kW
120 and 240V, Single Phase
General Purpose Terminal Enclosure
INCOLOY Sheath Elements (75 W/In 2 )
Integral Thermostat (60 - 190°F)
Integral Automatic Cutout (Set at 195°F)

Circulation Heaters - View related products

Description

APPLICATIONS Used to heat clean and corrosive solutions. Ideal for side-arm heating, in-line circulation and engine pre-heaters.

FEATURES Terminal Enclosure — E1 General Purpose is standard.
Elements — INCOLOY sheath elements rated 75 W/In2.
Flange — Stainless steel flange for corrosion resistance.
Vessel — CPVC pipe body material is resistant to many corrosive solutions and is ideal for water applications. Pipe body material provides good thermal insulation, reducing heat loss.
Thermostat — Integral thermostat with 60 to 190°F temperature range, located inside the terminal enclosure.
High Limit Control — Integral automatic cutout (overtemperature control) protects against fluid or element overheat (set to open at 195°F).
Vibration Resistant — Vibration resistant construction to withstand vibrations typically experienced on many types of operating equipment (i.e., engines).
Easy to Install — Minimal size and light weight, no supporting brackets are required.

Dimensions (Inches)

kW	Volts	Ckt & Phase	Dimensions (In.)		Model No.	Wt. (Lbs.)
kW	Volts	Ckt & Phase	A	B	Model No.	Wt. (Lbs.)
1.5	120	1-1	17 5/16	12 3/8	CVCHS-01-01P5-E1/120V	3
1.5	240	1-1	17 5/16	12 3/8	CVCHS-01-01P5-E1/240V	3
2	120	1-1	17 5/16	12 3/8	CVCHS-01-002P-E1/120V	3
2	240	1-1	17 5/16	12 3/8	CVCHS-01-002P-E1/240V	3
2.5	120	1-1	21 5/16	16 3/8	CVCHS-01-02P5-E1/120V	4
2.5	240	1-1	21 5/16	16 3/8	CVCHS-01-02P5-E1/240V	4
3	120	1-1	21 5/16	16 3/8	CVCHS-01-003P-E1/120V	4
3	240	1-1	21 5/16	16 3/8	CVCHS-01-003P-E1/240V	4

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

CVCHS-201/120V

AUD5,040.00

Availability: 7 weeks

2kW, 120V, Incoloy sheath elements

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Ordering Example: (1) CVCHS-01-002P-E1-240V Corrosive solution booster heater,2000 watts, 240 volt, AUD4,765.00