DRF-PR Process Input Signal Conditioners

DRF-PR Series

^AUD405.00 DRF-PR-115VAC-0/10VDC-4/20

PLACE ORDER

Process Signals up to 10 Vdc
and up to 50 mA
Accuracy 0.2%
Response Time <70 mS
Excitation Voltage for Transducers +15 Vdc (20 mA)
Galvanic Isolation between Input, Output and Power

Signal Conditioners/Transmitters - View related products

Description

The DRF series DIN rail signal conditioners are designed to accept a broad range of input signals, such as ac and dc voltage and current, frequency, temperature (thermocouple and RTD), and process transducers, and provide standard process outputs of either 4 to 20 mA, or 0 to 10 Vdc. The DRF series feature a modern housing design, that is easily mounted on standard 35 mm DIN rails. Connections are safely and securely made through pluggable screw terminal connectors, with input and output connections on the opposite sides of the module.

The DRF-PR signal conditioner accepts a dc process signal input and provides an isolated 0 to 10 Vdc or 4 to 20 mA output. Models are available with three different power options, 24 Vdc, 120 Vac and 240 Vac.

The DRF-PR are ideally suited for industrial applications. They feature galvanic isolation between input, output and power up to 3500 Veff (model specific). Module response time is 70 ms or less.

Range Code Table

Range Code	Range
0/5MA	0 to 5 mA
0/50MA	0 to 50 mA
0/20MA	0 to 20 mA
4/20MA	4 to 20 mA
0/1VDC	0 to 1 Vdc
0/10VDC	0 to 10 Vdc

SPECIFICATIONS

Accuracy: <0.2% full scale
Linearity: <<0.1% full scale
Thermal Drift: 150 ppm/°C typical (max <200ppm/°C)
Response Time: <70 mS (90% of signal)at 20 Hz -3 dB
Impedance and Overvoltage:

Range	Impedance	Overvoltage(max)
4 to 20mA	50Ω	3.5 Vdc
0 to 20mA	50Ω	3.5 Vdc
0 to 50mA	20Ω	2.5 Vdc
0 to 5mA	20Ω	2.5 Vdc
0 to 10Vdc	5MΩ	150 Vdc
0 to 1Vdc	1MΩ	15 Vdc

Power: 24 Vdc ±10%, 230 Vac ±10% 50/60 Hz, 115 Vac ±10% 50/60 Hz
Power Consumption: <3.8 VA

Output: 4 to 20 mA and 0 to 10 Vdc
Maximum Voltage Output: 11 Vdc approx.
Minimum Voltage Output: -1 Vdc approx.
Minimum Load Resistance (Voltage): >1 KΩ Maximum Current Output: 22 mA approx.
Maximum Current Output: -1.5 mA approx.
Maximum Load Resistance (current): >400 Ω

Vexc Output for Transducers:+15 Vdc ±10% (22 mA max.)

Electrical Connections: Plug-in screw terminals
Protection: IP-30

MECHANICAL DIMENSIONS
Weight:
(DC Powered Models): 120 g (4.2 oz)
(AC Powered Models): 200 g (7 oz)
Dimensions:
(DC Powered models):
110 H x 22.5 W x 93 mm D (4.3 x 0.9 x 3.7")
(AC Powered models):
110 H x 37 W x 93 mm D (4.3 x 1.46 x 3.7")
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Below are examples of popular models. See the Part Number Builder to order any available model.

DRF-PR-115VAC-0/10VDC-4/20

AUD405.00

Availability: 1 week

Process signal conditioner with 0 to 10V input and 4 to 20 mA output, 115 Vac power

DRF-PR-115VAC-0/10VDC-0/10

AUD405.00

Availability: 1 week

Process signal conditioner with 0 to 10V input and 0 to 10Vdc output, 115 Vac power

† All amounts shown in AUD
Ordering Example: (1) DRF-PR-115VAC-0/10VDC-4/20 Process input signal conditioner with 0 to 10 volt input, 4 to 20mA output and 115Vac power, AUD405.00

Part Number Builder

Build Your Part Number Below

	(1)		(2)		(3)
DRF-PR-		-		-

Option Descriptions:

(1) Power select from:
24VDC for 24Vdc power
115VAC for 115Vac power
230VAC for 230Vac power

(2) Input Signal select from:
0/5MA for 0 to 5 mA
0/50MA for 0 to 50 mA
0/20MA for 0 to 20mA
4/20MA for 4 to 20mA
0/1VDC for 0 to 1 Vdc
0/10VDC for 0 to 10 Vdc

(3) Output select from:
4/20 for 4 to 20mA
0/10 for 0 to 10Vdc

Note: All combinations may not be valid, check spec sheet for valid part numbers.