Ceramic Insulated Finned Channel Strip Enclosure Heaters

EHF Series

10-32 offset screw terminals (T4 style) standard, other terminations available
UL recognized component
Stainless steel sheath and fins
Easy installation with special enclosure mounting brackets
Rugged, Durable Construction
Stainless Steel Sheath
Nickel-Plated Steel Fins (Stainless Steel Optional)
Various Terminations
Trouble-Free Installation
Various Sizes in Stock

Strip Heaters - View related products

Description

OMEGA™ finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens).
The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air.
OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.

Specifications and Tolerances
Performance Ratings
Maximum Sheath Temperature: 650°C (1200°F)
Electrical Specifications
Maximum Voltage: 480 Vac (when applicable)
Maximum Amperage: 25 A
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Material Specifications and Physical Sizes
Sheath: 304 stainless steel
Fins: Nickel plated steel (stainless steel optional)
Screw Terminals: Stainless steel 10-32 UNF threads
Width Including Fins: 51 mm (2")
Height Including Fins: 35 mm (13/8")
Length Tolerance: Up to 0.61 m (24") ±1/16", over 0.61 m (24") ±1/8"
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Slot Size For Secondary Insulating Bushing: 13 x 16 mm (1/2 × 5/8") for 300V and above

Model No.		Overall Length	Mounting Dimension	Watts
120V	240V	Overall Length	Mounting Dimension	Watts
EHF00001	EHF00002	12.125	11.375	200
EHF00003	EHF00004	15.625	14.875	350
EHF00005	EHF00006	19.5	18.75	450
EHF00007	EHF00008	25.375	24.625	700
Ordering Example: EHF00001, 200 watt, 120 Vac, finned strip enclosure heater.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

EHF00001

AUD382.00

Availability: 6 weeks

120 Volt, 200 Watts, Overall Length: 12.125 Inches

EHF00007

AUD600.00

Availability: 4 weeks

120 Volt, 700 Watts, Overall Length: 23.375 Inches

EHF00002

AUD375.00

Availability: 4 weeks

240 Volt, 200 Watts, Overall Length: 12.125 Inches

EHF00008

Consult Sales

Availability:

240 Volt, 700 Watts, Overall Length: 24.375Inches

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Ordering Example: (1) EHF00002 240 Volt, 200 Watts, Overall Length: 12.125 Inches, AUD375.00