High Temperature Constant Wattage Heating Cable

KE Series

^AUD16.00 KE4-120

PLACE ORDER

Continuous Exposure Rating up to 500°F
Low Watt Density
Parallel Resistance Heater
Cut-to-Length at the Job Site
Constant Watt Density
All Common Voltages Available
Moisture and Chemical Resistance
Continuous Electrical Ground
Designed for freeze protection and process temperature maintenance.

Electrical Heating Cable Systems - View related products

Description

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series

Power	120V	208V	240V	277V	480V
4 Watts/ft	349'	606'	699'	806'	1398'
8 Watts/ft	247'	428'	494'	570'	988'
12 Watts/ft	202'	350'	403'	466'	807'

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Prices below are per foot

4 WATTS/FT

KE4-120

AUD16.00

Availability: 10 weeks

high temperature, constant wattage cable, 4 W/FT, 120 V

KE4-240

AUD33.91

Availability: 1 week

high temperature, constant wattage cable, 4 W/FT, 240 V

8 WATTS/FT

KE8-240

AUD33.00

Availability: 10 weeks

high temperature, constant wattage cable, 8 W/FT, 240 V

12 WATTS/FT

KE12-120

AUD16.25

Availability: 11 weeks

high temperature, constant wattage cable, 12 W/FT, 120 V

KE12-240

AUD33.00

Availability: 11 weeks

high temperature, constant wattage cable, 12 W/FT, 240 V

Accessories

KE-UC-KIT

AUD104.00

Availability: 1 week

Termination Kit (for KE Series)

KE-KC-KIT

AUD104.00

Availability: 10 weeks

Termination Kit (for KE Series)

FE-UC-KIT

AUD101.00

Availability: 11 weeks

Termination Kit (for FE Series)

FE-KC-KIT

AUD109.00

Availability: 11 weeks

Termination Kit (for FE Series)

SK-KIT

AUD50.00

Availability: 10 weeks

Splice Kit

FE-SK-KIT

AUD74.00

Availability: 11 weeks

Splice Kit (for FE Series)

RTV-SS

AUD21.50

Availability: 10 weeks

Silicone Sealant

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Note:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable, (2) control options - we offer complete selection of controllers and thermostats.