POLYIMIDE HEATER KIT

KHA-KIT

^AUD482.52 KHA-KIT

PLACE ORDER

Withstand Temperature Extremes from -56ºC to 200ºC (-70ºF to 392ºF)
Excellent Tensile Strength, and Tear Resistance
Low Out-Gassing
Wattage 2.5, 5, or 10 W/in2
Small, Flexible Radius (0.032" Minimum)
Chemical Resistance to Many Solvents and Oils
Pressure Sensitive Adhesive
28 or 115 or 230 Vac
Multiple Heaters with Various Wattages and Profiles
Typical Applications
Aerospace
Analytical Equipment
Tooling
Commercial Equipment
Agriculture
Packaging
Material Handling

Flexible Heaters - View related products

Description

The Polyimide heater kit contains thin and flexible heaters with adhesive backing to conform to practically any flat or curved surface. With 15 different shapes, this kit can suit almost any application. Heater configurations are outlined on a 0.3 x 0.3 m (1x1') sheet, with line markings for easy selection and cutout. When used in combination, these heaters can provide a number of resistances and wattages. Leads can be soldered on or connected with alligator clips.

Specifications
Thickness: 0.203 mm (0.008")
Maximum Operating Temperature:
    Polyimide: 200°C (392°F)
    Adhesive Backing (Continuous Use): 120°C (248ºF)
    Adhesive Backing (Short Time Periods): Up to 232°C (450°F)
Dielectric Strength: 1000 Vac minimum

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

KHA-KIT

AUD482.52

Availability: 8 weeks

Polyimide flexible heater sample kit with 15 different shapes

† All amounts shown in AUD
Note: Note: All kit heaters require either a temperature or power controller to regulate heater temperature.
CAUTION AND WARNING!
Fire and elctrical shock may result if products are used improperly or installed or used by non-qualified personnel.