Clean Water 1 or 3 Phase Immersion Heater— 2½" NPT Fitting

MT-3 Series

Immersion Heater

^AUD885.00 MT-330A/240V/3P

PLACE ORDER

Rugged, Heavy Duty Construction
Models Available with Explosion Resistant Enclosure
0.475" Diameter Copper Sheath, Ideal for pH 6 to pH 8 Liquids
3 to 18 kw
120, 208, 240 and 480 Vac 1 and 3 Phase Power

Immersion Heaters - View related products

Description

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our selection of process controllers. Not intended for use in hazardous areas.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

MT-330E2/120V

AUD1,460.00

Availability: 6 weeks

120 Vac, 3 kW, E2 enclosure

MT-330A/240V/3P

AUD885.00

Availability: 6 weeks

240 Vac, 3 kW, 3 phase, 51 W/in 3 heating elements, Dim B inches (cm) 73/8 (19)

MT-330A/480V/3P

AUD885.00

Availability: 6 weeks

480 Vac, 3 kW, 3 phase, 51 W/in 3 heating elements, Dim B inches (cm) 73/8 (19)

MT-390A/208V

AUD1,645.00

Availability: 6 weeks

208 Vac, 9 kW, single phase

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Ordering Example: (1) MT-330A/240V/3P a 3kW heater powered by 1 phase 240VAC, AUD885.00

Part Number Builder

Build Your Part Number Below

		(1)	(2)		(3)	(4)
MT-	3			/

Option Descriptions:

(1) Wattage Rating select from:
30 for 3 kW
37 for 3.75 kW
45 for 4.5 kW
60 for 6 kW
75 for 7.5 kW
90 for 9 kW
120 for 12 kW
150 for 15 kW
180 for 18kW

(2) Enclosure style select from:
A for General Purpose
E2 for Explosion Resistant Moisture Tight

(3) Voltage select from:
120V for 120 Vac
208V for 208 Vac
240V for 240 Vac
480V for 480 Vac

(4) Phase select from:
Nothing(leave field blank) for 1 Phase
/3P for 3 Phase

Note: All combinations may not be valid, check spec sheet for valid part numbers.