Clean Water Immersion Heater 1¼" NPT Fitting

MT-1 Series

Clean Water Immersion Heaters

^AUD490.00 MT-112A/240V

PLACE ORDER

1¼" NPT Brass Screw Plug
120 V and 240V, 1 Phase
General Purpose Models NEMA-1 Rated and UL Listed
Copper Sheath, Ideal for Clean Water Applications

Immersion Heaters - View related products

Description

The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure.

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our complete selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

MT-1 Series

E1 General Purpose Encl.¹ Model No.	E2 Explos. Res./ Moist Res Encl.² Model No.	kW	Phase	W/in2	No. Elem.	Dim. B in (cm)
MT-160A/*	MT-160E2/*	0.6	1	53	1	6 1/8 (16)
MT-175A/*	MT-175E2/*	0.75	1	65	1	6 1/8 (16)
MT-110A/*	MT-110E2/*	1	1	86	1	6 1/8 (16)
MT-110-3A/*	MT-110-3E2/*	1	1	43	2	6 1/8 (16)
MT-112A/*	MT-112E2/*	1.2	1	53	2	6 1/8 (16)
MT-115A/*	MT-115E2/*	1.5	1	65	2	6 1/8 (16)
MT-120A/*	MT-120E2/*	2	1	86	2	6 1/8 (16)

/* Designate voltage, insert 120 for 120 VAC or 240 for 240 VAC. Higher wattages available - contact OMEGALUX.
1. Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2. Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

MT-112A/240V

AUD490.00

Availability: 6 weeks

1.2 kW heater powered by 240 VAC and NEMA-1 general purpose enclosure

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

		(1)	(2)		(3)
MT-	1			/

Option Descriptions:

(1) kW select from:
60 for 0.6 kW
75 for 0.75 kW
10 for 1 kW
10-3 for 1 kW (MT-110-3A & MT-110-3E2 only)
12 for 1.2 kW
15 for 1.5 kW
20 for 2 kW

(2) Enclosure select from:
A for General Purpose Enclosure
E2 for E2 Moisture Tight Explosion Resistant Enclosure

(3) Voltage select from:
120V for 120 Vac
240V for 240 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.