UL Listed and Nema 1 Rated Clean Water Immersion 2" NPT

MT-2 Series

Water Heater

^AUD635.00 MT-215A/120V

PLACE ORDER

Rugged General Purpose Models-UL Listed and NEMA-1 Rated
Optional Moisture Tight/ Explosion Resistant Enclosure Available
Ideal for pH 6 to pH 8 Clean Liquids
1.5 and 15 kW
120, 208, 240, 280, and 480 Volts

Immersion Heaters - View related products

Description

The OMEGALUX™ MT-2 Series utilizes a copper sheath ideal for clean liquids within the pH6 to 8 pH range.

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See section P for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	W/in2	No. Htg Elem.	Dim. B in (cm)	E-1 Gen. Purpose Enclosure¹ Model No.	Wt. Ib. (kg)	E2 Explos. Res/Moist. Tight Encl.² Model No.	Wt. Ib. (kg)
1.5	48	1	12 (30)	MT-215A/*	3 (1)	MT-215E2/*	6 (3)
2	48	1	18 (46)	MT-220A/*	3 (1)	MT-220E2/*	6 (3)
2.5	51	2	8 (20)	MT-220-3A/*	3 (1)	MT-220-3E2/*	6 (3)
3	48	2	9 1/2 (24)	MT-225A/*	3 (1)	MT-225E2/*	6 (3)
4	48	2	12 (30)	MT-230A/*	4 (2)	MT-230E2/*	7 (3)
5	48	2	18 (46)	MT-240A/*	4 (2)	MT-240E2/*	7 (3)
6	53	2	19 13/16 (49)	MT-250A/*	5 (2)	MT-250E2/*	8 (4)
6	47	2	25 1/8(64)	MT-260A/240	5 (2)	MT-260E2/240	8 (4)
7	47	2	25 1/8 (64)	MT-260A/480	5 (2)	MT-260E2/480	8 (4)
7	49	2	28 (71)	MT-270A/240	6 (3)	MT-270E2/240	9 (5)
10	49	2	40 1/2 (103)	MT-270A/480	6 (3)	MT-270E2/480	9 (5)
12	46	2	48 (122)	MT-2100A/*	7 (3)	MT-2100E2/*	10 (5)
12	46	2	48 (122)	MT-2120A/**†	8 (4)	MT-2120E2/**†	11 (5)

/* Designates Voltage; insert 120 for 120 VAC, 208 for 208 VAC, 240 for 240 VAC, or 280 for 280 VAC
/**Designates Voltage; 208 for 208 VAC, 240 for 240 VAC,or 480 for 480 VAC
Those model numbers already containing 240 or 480 are only available in that voltage.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified except model with † (MT-2120A/ 208 & 240 Vac, exceeds 48 Amps.)
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas, except model with † (MT-2120E2/ 208 & 240 Vac, exceeds 48 Amps).

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

MT-215A/120V

AUD635.00

Availability: 6 weeks

Heater, 1.5 kW, 120 V

MT-250A/120V

AUD1,065.00

Availability: 6 weeks

Heater, 6 kW, 120 V

MT-250A/240V

AUD1,065.00

Availability: 5 weeks

Heater, 6 kW, 240 V

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

	(1)	(2)		(3)
MT-2			/

Option Descriptions:

(1) Code in Part Number select from:
15 for code 15
20 for code 20
20-3 for code 20-3
25 for code 25
30 for code 30
40 for code 40
50 for code 50
60 for code 60
70 for code 70
100 for code 100
120 for code 120

(2) Code in Part Number select from:
A for code A
E2 for code E2

(3) Voltage select from:
120V for 120 V
208V for 208 V
240V for 240 V
480V for 480 V

Note: All combinations may not be valid, check spec sheet for valid part numbers.