Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

LIGHTWEIGHT OIL IMMERSION HEATER With 2 Element Design With 2 Inch NPT Steel Screw Plug

MTO-2 Series

LIGHTWEIGHT OIL IMMERSION HEATER  | MTO-2 Series

LIGHTWEIGHT OIL IMMERSION HEATER

AUD1,000.00 MTO-215A/120V

  • Rugged Steel Sheath for Use with Lightweight Oils
  • 1.5 to 6 kW
  • 120 280, 240 or 480V. 1 Phase
  • General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2
Immersion Heaters - View related products

Description

Please Note: The immersion heater should be used with an approved temperature control device to assure safe operation. See Temperature Section for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.



kW W/in2 No. Htg.
Elem.
Dim. B
in (cm)
E1 General Purpose Enclosure1 E2 Explos. /Moist Res. Encl.2
Model No. Wt.
Ib (kg)
Model No. Wt.
Ib (kg)
1.524211 3/4(30)MTO-215A/*3 (1)MTO-215E2/*6 (3)
224217 3/4 (45)MTO-220A/*4 (2)MTO-220E2/*7 (3)
2.526219 5/8 (9)MTO-225A/*4 (2)MTO-225E2/*7 (3)
323224 7/8 (63)MTO-230A/*4 (2)MTO-230E2/*7 (3)
423232 3/4 (83)MTO-240A/*6 (3)MTO-240E2/*8 (4)
523240 1/4 (102)MTO-250A/*7 (3)MTO-250E2/*8 (4)
623247 3/4 (121)MTO-260A/**7 (3)MTO-260E2/**9 (4)
/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 VAC, 240 for 240 Vac, or 480 for 480 Vac.
//* Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
1 Heaters with General Purpose Enclosures are UL recognized and CSA Certified.
2 Heaters with Moisture Resistant/Explosion Resistant Enclosures are CSA NRTL/C Certified.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.
MTO-215A/120V
AUD1,000.00
Availability: 6 weeks
 
Heater, 1.5 kW, 120 V, E1 general purpose enclosure
MTO-225A/208V
AUD1,225.00
Availability: 6 weeks
 
Heater, 2.5 kW, 208 V, E1 general purpose enclosure

Order By Part Number

Part Number
Qty
Part Number
Qty


All amounts shown in AUD
Note: Caution: Explosion resistant type E2 construction refers to heater design features which provide explosion resisting containment of electrical wiring according to National Electric Code. Abnormal application or use of heaters which in excessive temperatures can create hazardous conditions which can lead to fire
Ordering Example: (1) MTO-215A/240V 1.5 kW heater powered by 240 Vac, AUD1,005.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Wattage select from:
15 for 1.5 kW
20 for 2 kW
25 for 2.5 kW
30 for 3 kW
40 for 4 kW
50 for 5 kW
60 for 6 kW

(2) Enclosure select from:
A for General Purpose Enclosure
E2 for Moisture Resistant/Explosion Resistant Enclosures

(3) Voltage select from:
120V for 120 V
208V for 208 V
240V for 240 V
480V for 480 V
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.