Medium Weight Oil Immersion Heater with 2 Element Design-2" NPT Steel Screw Plug

MTO-2 Series

Medium Weight Oil Screw Plug Immersion Heater

^AUD1,345.00 MTO-2020/240V

PLACE ORDER

Heavy Duty Steel Sheath for Use With Medium Weight Oils
Low Watt Density
2 to 6kW
240 and 480V, 1 Phase
General Purpose NEMA- Enclosure or Moisture Resistant/Explosion Resistant^2† Enclosure Available

Immersion Heaters - View related products

Description

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our selection of process controllers.

SPECIFICATIONS
Wattage: 2 to 6 kW
Power: 240 and 480V, 1 phase
Watt Density: 15 W/in²
Sheath: 0.475" diameter Screw Plug: 2" NPT steel
Enclosure: E1 General Purpose, NEMA-1 rated¹, or E2 moisture resistant/explosion resistant enclosure.²

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

MTO-2020/240V

AUD1,345.00

Availability: 6 weeks

240 Vac, 2 kW, 15 W/in2 with General Purpose Enclosure

MTO-2020E2/240V

Consult Sales

Availability:

240 Vac, 2 kW, 15 W/in2 with Moisture/Explos. Res. Enc.

MTO-2033/480V

AUD1,895.00

Availability: 6 weeks

480 Vac, 3.33 kW, 15 W/in2 with General Purpose Enclosure

MTO-2033E2/480V

Consult Sales

Availability:

480 Vac, 3.33 kW, 15 W/in2 with Moisture/Explos. Res. Enc.

MTO-2060/480V

Consult Sales

Availability:

480 Vac, 6 kW, 15 W/in2 with General Purpose Enclosure

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Note: †Caution: Explosion resistant type E2 construction refers to heater design features which provide explosion resisting containment of electrical wiring according to National Electric Code. Abnormal application or use of heaters which in excessive temperatures can create hazardous conditions which can lead to fire. Not intended for use in hazardous areas.
¹ Heaters with general purpose enclosures are UL listed and CSA certified.
² Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified.
* For dimensional information, please click on download under related links below.

Part Number Builder

Build Your Part Number Below

		(1)	(2)		(3)
MTO-	20			/

Option Descriptions:

(1) Watts and Watt density select from:
20 for 2 kW
26 for 2.66 kW
33 for 3.33 kW
40 for 4 kW
50 for 5 kW
60 for 6 kW

(2) Enclosure select from:
Nothing(leave field blank) for General Purpose Enclosure
E2 for Moisture Resistant/Explosion Resistant Enclosure

(3) Voltage Rating select from:
240V for 240 Vac
208V for 208 Vac
480V for 480 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.