Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Norgren Excelon® Air Line Smooth Start/ Exhaust Dump Valves for Compressed Air Systems

P72F Series Combined Pneumatic Soft Start and Dump Valve

Smooth Start/ Exhaust  Dump Safety Valves | P72F Series Combined Pneumatic Soft Start and Dump Valve

Smooth Start/ Exhaust Dump Safety Valves

CE
  • In-Line or Modular Installation
  • Controls Increase of Downstream Pressure on Start Up. Cylinders and Other Air Operated Devices are Eased Into Normal Operating Positions, Reducing the Possibility of Equipment Damage and Hazards to the User
  • Blocks Inlet Air and Exhausts Downstream Air When Pilot Signal is Removed or When the Optional Manual Lockout Slide is Closed
  • Optional Manual Slide Can be Padlocked in Closed Position
  • Solenoid Pilot or Air Pilot Operation
  • Designed Primarily for Use in Start-Up and Shutdown of Equipment
Motion - View related products

Description


The P72F Series Smooth Start/Exhaust Valves are designed for use as a single in-line unit or as part of Norgren's Excelon® modular compressed air preparation supply system. As a modular component, this smooth start /exhaust valve can quickly be attached to filters, oilers, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes.

Smooth start/exhaust valves are commonly refered to as pneumatic dump valves. Smooth start valve controls the start up and shut down of pneumatic air supply by quickly controlling the air pressure to eliminate the hammering effect of sudden air pressure to pneumatic equipment. The exhaust valve blocks the inlet air supply and exhausts the downstream air when the pilot supply signal is removed.

As a modular pneumatic component, this regulator can quickly be attached to filters, oilers, smooth start / exhaust valves, safety lockout valves and pipe adapters. With our Quickclamp® and Quickclamp® and wall bracket accessories, a complete compressed air supply system can be assembled and mounted in minutes.

SPECIFICATIONS
Fluid: Compressed air
Maximum Pressure Solenoid Operated: Depending on solenoid rating [must not exceed 17 bar(250 psig)]
Maximum Pressure Pilot Operated: 17 bar (250 psig)
Minimum Operating Pressure: 3 bar (44 psig)
Operating Temperature Solenoid Operated: Dependent on solenoid rating [must be within range -20 to 65°C (0 to 150°F)](72)[must be within range -20 to 80°C(0 to 175°F)](74)
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Solenoid Operation
P72F-2AC-PFA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve ¼' port, 24 Vdc
P72F-2AC-PAA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve ¼' port, 110/120 Vac
P72F-3AC-PFA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve 38' port, 24 Vdc
P72F-3AC-PAA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve 38' port, 110/120 Vac
P74F-3AC-PFA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve 38' port, 24 Vdc
P74F-3AC-PAA
AUD905.00
Availability: 1 week
 
Smooth start / exhaust valve 38' port, 110/120 Vac
P74F-4AC-PFA
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve ½' port, 24 Vdc
P74F-4AC-PAA
AUD1,040.00
Availability: 1 week
 
Smooth start / exhaust valve ½' port, 110/120 Vac
Air Pilot Operation
P72F-2AA-NNN
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve ¼' port
P72F-3AA-NNN
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve 38' port
P74F-3AA-NNN
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve 38' port
P74F-4AA-NNN
Consult Sales  
Availability: 
 
 
Smooth start / exhaust valve ½' port
All amounts shown in AUD
Note: * Solenoid operated models are supplied with coil and connector plug without indicator lights.
 
We noticed you are from the US. Visit your local site for regional offers and live support.