Explosion Resistant Drum Heaters

SEPDH Series

^AUD4,545.00 SEPDH-C-1000-240-T4A

PLACE ORDER

Factory Mutual Hazardous Area Approval
Class I, Div 2, Groups B, C, and D; Class II, Div 2, Groups F and G
Inherently Safe
Integral Built-In High-Limit Thermal Cutout** Prevents Temperature Runaway
Up to 21/2 Watts Per Square Inch

Flexible Heaters - View related products

Description

OMEGALUX™ silicone rubber area drum heaters are low-watt density electrical resistance heaters in blanket form. They are designed to provide a practical, efficient means of freeze protection, viscosity control, melting of solids, and maintaining materials at elevated temperatures in Class I, Division 2 areas.
OMEGALUX™ SEPDH drum heaters feature built-in high-limit thermal cutout protection, which, in the event of a primary temperature controller failure, maintains heater sheath temperature below the minimum safe auto-ignition temperature of the material being heated or materials in the area. OMEGALUX™ SEPDH drum heaters are compatible with most chemical fluids and oils used in field service. Unlike many other drum heaters, the SEPDH has a thin-line design that lets it fit between the drum and the cradle.

Insert Codes for model numbers
High-Limit Thermostat Temperature
T4A: 70°C (158°F)
T3 :145°C (293°F)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

55 Gallon

SEPDH-C-1300-120-T3

AUD4,635.00

Availability: 10 weeks

EXPLOSION-RESISTANT DRUM HEATER, 120V

SEPDH-C-1300-120-T4A

AUD4,635.00

Availability: 10 weeks

DRUM HEATER

SEPDH-C-1300-240-T3

AUD4,635.00

Availability: 10 weeks

DRUM HEATER

SEPDH-C-1300-240-T4A

AUD4,725.00

Availability: 10 weeks

DRUM HEATER

30 Gallon

SEPDH-C-1000-120-T4A

AUD4,545.00

Availability: 1 week

EXPLOSION-RESISTANT DRUM HEATER, 120V

SEPDH-C-1000-120-T3

AUD4,545.00

Availability: 10 weeks

EXPLOSION-RESISTANT DRUM HEATER, 120V

SEPDH-C-1000-240-T3

AUD4,545.00

Availability: 10 weeks

DRUM HEATER

SEPDH-C-1000-240-T4A

AUD4,545.00

Availability: 10 weeks

DRUM HEATER

† All amounts shown in AUD
Note: * Insert “High-Limit Thermostat Temperature” rating from above table. The maximum allowable sheath temperature (“T” rating) must be specified if drum heater is to be used in a Division 2 area. “C” specifies heaters with adjustable temperature control assembly and temperature ranges from -4 to 163°C (25 to 325°F).
** Article 501 of the NEC requires that the maximum sheath temperature of the heater shall not exceed 80 percent of the auto-ignition temperature of the surrounding atmosphere when heater is continuously energized.
Auto-Ignition Temperature: The minimum temperature required to initiate or cause selfsustained combustion of a solid, liquid or gas independently of the heating or heated element (see NFPA 325M, Fire Hazard Properties of Flammable Liquids, Gases, and Volatile Solids).
Ordering Example: (1) SEPDH-C-1300-120-T3 55 gallon, 120 V drum heater with a T3 rating of 156°C (312°F), AUD4,635.00