Terminal Covers, Clamping Bands and Insulators

STRIP Heater Accessories

^AUD64.47 PCN255716

Description

Secondary Insulation Bushing: All types except NS. Must be used when strips are mounted for air heating only or when connected in series on line voltages above 480V. Note: To accommodate bushings, a 17 /32 " x 11 /16 " dia. mounting hole in tabs should be specified for heaters. To order secondary insulation bushings, use model no. PCN255716.

Strip Element Clamps: Cast-iron clamps for use with OMEGALUX ® strip elements, retain their strength at elevated temperatures to assure maximum sheath-to-surface contact. Resulting uniform efficient heat transfer from internal resistance wire to the heated material avoids hot spots on the element, contributing to long service life.

Type SC Clamping Bands: A permanently tight fit on cylinders, nozzles, pipes and other round surfaces is provided by the Type SC stainless steel band with alloy screw. For small pipe diameters, strip elements should have cross-section curving (contact OMEGALUX). For most satisfactory results, bands should be spaced about 5 inches apart and should be drawn up tight to assure good contact between heater or thermostat bulb and surface. Installation: Fasten studs to the work surface by welding, brazing or threading. Use correct size stud to fit clamp. (See sketches to left). For temperatures over 750°F, stainless steel studs are recommended. When tightening nuts, torsion should not exceed 10 foot pounds maximum. Heaters must be allowed to expand. One clamp should hold heater. Nuts on other clamp should be backed off approx. 1 /2 turn to allow heaters to expand.

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.

Qty

Description

Terminal Covers and Insulator

PCN255716

AUD64.47

Availability: 2 weeks

Secondary insulation bushing

H-TP

AUD61.00

Availability: 7 weeks

Ceramic post terminal insulators

OT-AC-1

AUD86.84

Availability: 5 weeks

Terminal cover for OT series strip heaters

PT-AC-1

AUD78.00

Availability: 5 weeks

Terminal cover for PT series strip heaters

SE-AC-1

AUD76.00

Availability: 1 week

Terminal cover for SE series strip heaters

† All amounts shown in AUD