Flanged Immersion Heaters for Severe Corrosive Solution

TMIS Series

3, 5 & 6 Inch, 150 lb (68 kg) Stainless Steel Flange
Rugged 0.475" Diameter Incoloy Sheath Heating Elements for Use in Severe Corrosive Solutions
240 and 480 V, 3 Phase
2 to 24 kW

Immersion Heaters - View related products

Description

FEATURES
Rugged Construction. Sturdy 0.475" diameter Incoloy elements, welded to stainless steel flanges - corrosion resistance provides superior rigidity and strength. Heavy duty jumper straps and terminal posts assure permanent tightness of connections and an extra margin of current carrying capacity.

APPLICATIONS
For severe corrosive solutions. For solutions with chemicals with more severe corrosive properties than can be used with other sheath materials and where corrosive action is accelerated by higher sheath temperatures. For heavy solution concentrations in the 30 to 50% range. It should be noted that with high concentration, only the less corrosive chemicals may be put in the solution.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

kW	Circ.	Phase	B Dim. in. (cm)	E1 General Purpose Enclosure¹	Wt. lb (kg)	N³ Dim. in. (cm)
3 Inch-150 Lb. SS Flange, 3 Incoloy Elements — 15 W/in2
2	1	3	18 1/16 (46)	TMIS-3025L/*/3P	16 (7)	1 (2.54)
4	1	3	33 1/16 (84)	TMIS-3045L/*/3P	18 (8)	1 (2.54)
6	1	3	48 1/16 (122)	TMIS-3065L/*/3P	21 (10)	1 (2.54)
5 Inch-150 Lb. SS Flange, 6 Incoloy Elements — 15 W/in2
4	1	3	18 1/16 (46)	TMIS-6045L/*/3P	27 (12)	1 (2.54)
8	1	3	33 1/16 (84)	TMIS-6085L/*/3P	33 (15)	1 (2.54)
12	1	3	48 1/16 (122)	TMIS-6125L/*/3P	37 (17)	1 (2.54)
6 Inch-150 Lb. SS Flange, 12 Incoloy Elements — 15 W/in2
8	1	3	18 (46)	TMIS-1208L/*/3P	60 (36)	1 (2.54)
12	1	3	25 1/8 (64)	TMIS-1212L/*/3P	67 (27)	1 (2.54)
16	1	3	33 (84)	TMIS-1216L/*/3P	76 (34)	1 (2.54)
20	1	3	40 1/2 (103)	TMIS-1220L/*/3P	84 (38)	1 (2.54)
24	1	3	48 (122)	TMIS-1224L/*/3P	111 (50)	1 (2.54)

/* Designate voltage, i.e. insert 240V for 240 V or 480V for 480 V.
Note: Larger flange sizes and kW ratings are available. contact OMEGALUX.
1 Heaters with General Purpose & Moisture Resistant Enclosures are UL Listed and CSA Certified.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

TMIS-6125L-480V/3P

AUD11,555.00

Availability: 7 weeks

Heater, 12 kW, 480 V, incoloy sheath elements, 3 phase

TMIS-3025L/240V/3P

Consult Sales

Availability:

Heater, 2 kW, 240 V, incoloy sheath elements, 3 phase

TMIS-3125/480V/3P

Consult Sales

Availability:

Heater, 12kw, 480 V, incoloy sheath elements, 3 phase

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

	(1)	(2)		(3)
TMIS-			L/		/3p

Option Descriptions:

(1) Number of Incoloy Elements select from:
3 for 3 Incoloy Elements
6 for 6 Incoloy Elements
12 for 12 Incoloy Elements

(2) Wattage select from:
025 for 2 kW
045 for 4 kW
065 for 6 kW
08 for 8 kW
085 for 8 kW
12 for 12 kW
125 for 12 kW
16 for 16 kW
20 for 20 kW
24 for 24 kW

(3) Voltage select from:
240V for 240 V
480V for 480 V

Note: All combinations may not be valid, check spec sheet for valid part numbers.