Screw Plug Immersion Heaters

TSP01840

Stainless Steel, Brass or Steel Screw Plugs
Four Standard Screw Plug Sizes—25.4 mm (1"), 31.8 mm (11/4"), 50.8 mm (2"), 63.5 mm (21/2")
Recompacted Element Bends Restore Insulation Resistance after Forming
Thermowell for Optional Bulb and Capillary Thermostat, RTD or Thermocouple Probe
Corrosion-Resistant Electrical Wiring Hardware
Four Standard Sheath Materials—Copper, Steel, 316 Stainless Steel and Incoloy® 800
NEMA 1 Round Terminal Housing
Silicone Resin Element Seal Standard

Immersion Heaters - View related products

Description

Screw plug immersion heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Need Customer Assistance? We take pride in our record of working with our customers to develop the right heater for the job. Call OMEGA with your requirements.

Model Number			Nominal Pipe Size	Immersed Length		KW	Approximate Net Weight
60 watts/in² (9.3 watts/cm²)—Typical Applications: Clean Water
120V-1Ph	120/240V	240V-1Ph	Nominal Pipe Size	mm	inch	KW	kg	lbs
TSP01840	—	TSP01841	1 NPT 1 element	114	4¹⁄₂	0.5	1	2
TSP01842	—	TSP01843		165	6¹⁄₂	0.75	1	2
TSP01844	—	TSP01845		168	6⁵⁄₈	1	1	2
TSP01846	—	TSP01847		203	8	1.25	1	2
TSP01848	—	TSP01849		235	9¹⁄₄	1.5	1	3
TSP01850	—	TSP01851		318	12¹⁄₂	2	1	3
TSP01852	—	TSP01853		375	14³⁄₄	2.5	1	3
TSP01854	—	TSP01855		426	16³⁄₄	3	1	3
—	—	TSP01856		533	21	4	1	3
TSP01857	—	TSP01858	1¹⁄₄ NPT 1 element	111	4³⁄₈	0.5	1	3
TSP01859	—	TSP01860	1¹⁄₄ NPT 1 element	162	6³⁄₈	0.75	1	3
—	TSP01861	—	1¹⁄₄ NPT 2 elements	111	4³⁄₈	1	1	3
—	TSP01862	—		162	6³⁄₈	1.5	1	3
—	TSP01863	—		216	8¹⁄₂	2	1	3
—	TSP01864	—		273	10³⁄₄	2.5	2	4
—	TSP01865	—		381	15	3	2	4
—	—	TSP01866		483	19	4	2	4
—	—	TSP01867		597	23¹⁄₂	5	2	4
—	—	TSP01868		699	27¹⁄₂	6	2	5

Model Number					Nominal Pipe Size	Immersed Length		KW	Approximate Net Weight
120V-1Ph	120/240V	240V-3Ph	240/480V	480V-3Ph	Nominal Pipe Size	mm	inch	KW	kg	lbs
—	TSP01869	—	TSP01870	—	2 NPT 2 elements	206	8¹⁄₈	2	2	4
—	TSP01871	—	TSP01872	—		283	11¹⁄₈	3	2	4
—	TSP01873	—	TSP01874	—		384	15¹⁄₈	4	2	5
—	TSP01875	—	TSP01876	—		460	18¹⁄₈	5	2	5
—	—	—	TSP01877	—		537	21¹⁄₈	6	3	6
—	—	—	TSP01878	—		676	26⁵⁄₈	8	3	6
—	—	—	TSP01879	—		816	32¹⁄₈	10	3	6
TSP01880	—	TSP01881	—	TSP01882*	2 NPT 3 elements	206	8¹⁄₈	3	2	4
TSP01883	—	TSP01884	—	TSP01885*		283	11¹⁄₈	4.5	2	5
—	—	TSP01886	—	TSP01887		384	15¹⁄₈	6	2	5
—	—	TSP01888	—	TSP01889		460	18¹⁄₈	7.5	3	6
—	—	TSP01890	—	TSP01891		537	21¹⁄₈	9	3	6
—	—	TSP01892	—	TSP01893		676	26⁵⁄₈	12	3	7
—	—	TSP01894	—	TSP01895		816	32¹⁄₈	15	4	8
TSP01896	—	TSP01897	—	TSP01898*	2¹⁄₂NPT 3 elements	194	7⁵⁄₈	3	2	4
TSP01901	—	TSP01899	—	TSP01900*		225	8⁷⁄₈	3.75	2	5
—	—	TSP01902	—	TSP01903*		270	10⁵⁄₈	4.5	2	5
	—	TSP01904	—	TSP01905		371	14⁵⁄₈	6	3	6
—	—	TSP01906	—	TSP01907		448	17⁵⁄₈	7.5	3	6
—	—	TSP01908	—	TSP01909		524	20⁵⁄₈	9	3	7
—	—	TSP01910	—	TSP01911		664	26¹⁄₈	12	4	8
—	—	TSP01912	—	TSP01913		803	31⁵⁄₈	15	4	9
—	—	TSP01914	—	TSP01915		943	37¹⁄₈	18	5	10
Note: Dual-Voltage heaters are 1-Phase and are wired for the higher voltage unless otherwise specified. * 3-phase only. Other 3-phase heaters are convertible to 1-phase.

Model Number			Nominal Pipe Size	Immersed Length		KW	Approximate Net Weight
60 watts/in² (9.3 watts/cm²)—Typical Applications: Deionized Water and Demineralized Water
120V-1Ph	240V-3Ph	480V-3Ph	Nominal Pipe Size	mm	inch	KW	kg	lbs
TSP01822	TSP01823	TSP01824*	2¹⁄₂" NPT 2 elements	194	7⁵⁄₈	3	3	7
TSP01825	TSP01826	TSP01827*		270	10⁵⁄₈	4.5	3	7
—	TSP01828	TSP01829		372	14⁵⁄₈	6	4	8
—	TSP01830	TSP01831		448	17⁵⁄₈	7.5	4	8
—	TSP01832	TSP01833		524	20⁵⁄₈	9	4	9
—	TSP01834	TSP01835		664	26¹⁄₈	12	5	10
—	TSP01836	TSP01837		803	31⁵⁄₈	15	5	11
—	TSP01838	TSP01839		943	37¹⁄₈	18	5	12
Note: Dual-Voltage heaters are 1-Phase and are wired for the higher voltage unless otherwise specified. * 3-phase only. Other 3-phase heaters are convertible to 1-phase.