Adjustable Depth Armored Thermocouples

ADR and ADF

Armored Thermocouples

^AUD104.00 ADR-E-G-1-24-1

PLACE ORDER

Locking Fitting Freely Adjustable Over Flexible Armor
Spring-Action Catch Holds Probe Firmly in Place
TYPE ADF Fixed Locking Cap Becomes a Permanent Part of Your Installation
TYPE ADR Removable Locking Cap Bayonet Fitting Connects with a Twist

Thermocouples - View related products

Description

This unique thermocouple is easy to adjust to ANY immersion depth into thermowells (but NOTE: this probe cannot be immersed in liquids). Adjustable depth eliminates the need to stock a variety of fixed depth immersion probes. The locking cap can be positioned anywhere along the flexible armor and obtains its locking force from a unique spring- action catch. The welded stainless steel tipped probe is held against the bottom of the well by compression of the armor.

Two styles are available. Style ADF has a unique locking fitting that mounts permanently to your equipment. The quick release action of the locking fitting allows fast installation and removal of the probe.

Style ADR has a removable locking fitting and requires a BTA adapter. This style is ideal for installations where the mounting surface is under a layer of insulation, or where the locking cap must be removable.

Detailed Dimensions for ADR, ADF, and Termination Styles

Detailed Dimensions for ADR, ADF, and Termination Styles

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

ADF-T-U-2-48-3

Consult Sales

Availability:

Removable Locking Cap Probe, Type T, ungrounded junction, A dimension 2", B dimension 48", Female Quick Disconnect Termination

ADR-E-G-1-24-1

AUD104.00

Availability: 5 weeks

Removable Locking Cap Probe, Type E, grounded junction, A dimension 1", B dimension 24", Spade Lugs Termination

ADR-K-U-2-48-1

AUD107.00

Availability: 5 weeks

Removable Locking Cap Probe, Type K, ungrounded junction, A dimension 2", B dimension 48", Spade Lugs Termination

ADR-J-G-1/2-30-2

Consult Sales

Availability:

Removable Locking Cap Probe, Type J, grounded junction, A dimension 1/2", B dimension 30", Male Quick Disconnect Termination

Accessories

ADF-LF

AUD34.00

Availability: 4 weeks

Locking Fitting

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in AUD
Note: Click here for help in selecting the thermocouple junction.

Part Number Builder

Build Your Part Number Below

(1)		(2)		(3)		(4)		(5)		(6)
	-		-		-		-		-

Option Descriptions:

(1) Style select from:
ADR for style ADR
ADF for style ADF

(2) Calibration select from:
J for J type
K for K type
T for T type
E for E type

(3) Junction(see notes section above help selecting the junction) select from:
G for Grounded
U for Ungrounded

(4) A dimension select from:
1/2 for 1/2 in.
1 for 1 in.
2 for 2 in.
3 for 3 in.

(5) B dimension select from:
24 for 24 in.
30 for 30 in.
36 for 36 in.
48 for 48 in.

(6) Termination Styles select from:
1 for Spade Lugs
2 for Male Quick Disconnect Type OST
3 for Female Quick Disconnect Type OST

Note: All combinations may not be valid, check spec sheet for valid part numbers.