Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

DUAL PULSE TIMER

DPT35 Series

Dual Pulse Timer | DPT35 Series

Dual Pulse Timer

AUD1,365.00 DPT35

  • Single or Dual Pulse Timing
  • Easy Set-Up
Pumps & Mixers - View related products

Description

The DPT35 digital counter-timer is designed to be used with (or similar) meters and flow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The DPT35 serves as either a single or a dual timer, depending on whether one or both of its independent accumulators and timers are used. When the DPT35 is used as a single timer, the accumulator counts the pulses coming from the meter. When a pre-set number of pulses has been reached, output power turns on for a set time, and then the cycle repeats. For applications requiring dual timers (typically, one chemical feed and one water bleed), both accumulators and timers are set to operate independently, even though input is from a single meter or flow sensor. A sequential function can be selected to lock one timer out while the other is operating, this prevents feed and bleed from occurring simultaneously.

SPECIFICATIONS
Power: 115 Vac
Sensor Power: 12 Vdc
Output (2): 115 Vac
Enclosure: 127 x 178 mm (5 x 7") polycarbonate
Accumulator Range: 1 to 9999 pulses
Timer Range: 1 to 9999 seconds
Maximum Input: Frequency 1000 Hz
Relay Contact Rating: 5 A resistive @ 115 Vac, or 1/4 HP
Temperature: 0 to 55°C (32 to 130°F)
Weight: 4 lbs (64 oz)
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
DPT35
AUD1,365.00
Availability: 1 week
 
Dual pulse timer relay output
DPT35S
AUD1,630.00
Availability: 5 weeks
 
Dual pulse timer solid state output
All amounts shown in AUD
Note: Comes complete with splash proof cover and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.