Ultrasonic Doppler Flowmeter

FD-400 Series

^AUD4,252.64 FD-400

PLACE ORDER

Non-Intrusive, Clamp-On Transducer for Most Pipes from 6 mm to 3m (1/4 to 120")
Insertion Probe Transducer Also Available
Wide Measuring Range of 0.05 to 9 mps (0.15 to 30 fps)
±2% of Calibrated Span Accuracy
Configuration and Total Stored in Non-Volatile Flash ROM
NEMA 4X (IP66) Outdoor Enclosure
Provisions for Up to 4 Meters in a Single Piping System
NIST Certificate

Doppler/Transit-Time Ultrasonic Flow Meters - View related products

Description

The FD-400 Series ultrasonic doppler flowmeters measure the flow of liquids that contain sound reflectors, suspended solids, or gas bubbles larger than 100 microns. These sophisticated instruments automatically adjust filtering and gain settings to produce reliable readings in a wide range of liquid and reflector conditions.

The FD-400 flowmeter transmitts ultrasonic sound through the pipe wall or from the probe tip into the flowing liquid by using piezoelectric crystals contained in the transducer and probe tip. The sound is then reflected by sonic reflectors suspended in the liquid and recorded by the receiver. If the sonic reflectors are moving within the sound transmission path, sound waves will be reflected at a frequency shifted (Doppler frequency) from the transmitted frequency. The difference between the 2 frequencies is directly proportional to the speed of the sonic reflectors, resulting in a liquid flow rate that is converted to various user-defined units.

Configuration of the FD-400 is accomplished via the front-panel keypad. A 2-line backlit LCD displays rate and total in user-selected units. Power supply options include AC and DC. Optional outputs include 4 to 20 mA, relays, and rate pulse.

Two transducer styles are available. The FD-400C clamp-on, non-intrusive transducer is recommended for most metal or plastic pipes. The FD-400C has a NEMA 6P (IP68) rating and is available in a high-temperature version, "=HT". The user can place these clamp-on transducers up to 305 m (1000') from the display enclosure. The FD-400I insertion probe transducer should be used on piping systems that do not permit ultrasonic penetration. The FD-400I inserts into the pipe wall and comes into direct contact with the flowing liquid.

SPECIFICATIONS
GENERAL
Measuring Principle: Doppler ultrasonic
Flow Velocity Range: 0.05 to 9 mps (0.15 to 30 fps)
Accuracy: ±2% FS over calibrated span
Liquid Types: Liquids containing 100 ppm of useful sonic-suspended reflectors greater than 100 microns

MONITOR
Enclosure: NEMA 4X (IP66), polycarbonate, stainless steel, brass, plated-steel mounting brackets
Dimensions: 178 H x 146 W x 99 mm D (7.00 x 5.75 x 3.88")
Power Supply: 115 50/60 Hz(Standard), 230 Vac, 50/60 Hz ±15% @ 5 VA max (Optional) ; 12 to 28 Vdc @ 2.5 VA max (Optional)
Display: 2-line x 8-character LCD; LED backlighting; top row, 7-segment 18 mm (0.7"); bottom row, 14-segment 9 mm (0.35"); 8-digit rate, 8-digit total (resettable)
Units: User configured—feet, gallons, ft³, mil-gal, meters, liters, mil ft³, m³, mil-liters, acre-feet, oil barrels (42 gallon), liquor barrels (32.5 gallons), lb, kg
Rate: Interval—second, minute, hour, day
Totalizer exponent: E^-2 to E⁺⁶
Response Time: User selectable, 1 to 60 seconds
Outputs: 4 to 20 mA, 800 Ω max; internal or external power supply; 12-bit resolution; optically isolated
Dual Relay: Independently configured; form “C”, 200 Vac @ 0.5 A resistive; rate alarm, totalizer pulse, error
Rate Pulse: 2 output types— 500 mVac or open collector; 2500 Hz max; 12-bit resolution; 500 mV AC into 2 kΩ min; open collector 1 A at 100 V max
Multiple Meters: Synchronization provision included—used for multiple meter/single pipe system; up to 4 meters may be interconnected to 30 m (100') apart
Keypad: 4 pushbutton keys
Operating Temperature: General purpose, 40 to 85°C (40 to 185°F)

TRANSDUCERS
Type: Compression-mode ultrasonic, 625 kHz
Housing Material:
    Standard Clamp-On: NEMA 6P (IP68), -40 to 100°C (-40 to 210°F), CPVC, Ultem®, nylon, PVC (cable jacket), aluminum (small pipe)
    High-Temp Clamp-On: NEMA 4 (IP65), -40 to 200°C (-40 to 400°F), Vespel®, anodized aluminum, nickel-plated brass, PFA (cable jacket)
    Doppler Probe: NEMA 6 (IP67) -40 to 100°C (-40 to 210°F); 700 psi (48 bar) max, 316 SS, Ultem®, FKM, nylon, PVC (cable jacket)
    Optional Flexible Armored Conduit: Zinc-plated steel, PVC
Cable Length:
    Standard Lengths: 6 m (20') standard

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.

Qty

Description

Rate Indicator/Totalizer (Transducer Sold Separately)

FD-400

AUD4,252.64

Availability: 1 week

Ultrasonic rate and totalizer

FD-400-24VDC

AUD4,252.64

Availability: 6 weeks

Ultrasonic rate and totalizer 12-28VDC input power

FD-410

AUD4,836.33

Availability: 5 weeks

Rate and totalizer with 4 to 20 mA output

FD-410-24VDC

AUD4,834.15

Availability: 5 weeks

Rate and totalizer with 4 to 20 mA output, 12-28 VDC input power

FD-411

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with two 4 to 20 mA outputs

FD-412

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with 4 to 20 mA and 2 relay outputs

FD-413

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with 4 to 20 mA and pulse outputs

FD-420

AUD4,835.00

Availability: 5 weeks

Rate and totalizer with 2 relay outputs

FD-422

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with 4 relay outputs

FD-423

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with 2 relays and a pulse output

FD-430

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with pulse output

FD-433

AUD5,405.00

Availability: 5 weeks

Rate and totalizer with 2 pulse outputs

Clamp-On Transducers and Accessories

FD-400C-STD

AUD2,279.19

Availability: 1 week

Standard-size clamp-on transducer set, 25 to 3050 mm (1 to 120")

FD-400C-STD-50FT

AUD2,473.76

Availability: 6 weeks

Standard-size clamp-on transducer set, 25 to 3050 mm (1 to 120") 15 m (50')

FD-400C-STD-100FT

AUD2,697.75

Availability: 6 weeks

Standard-size clamp-on transducer set, 25 to 3050 mm (1 to 120") 30 m (100')

FD-400C-SML

AUD3,068.57

Availability: 1 week

Small-pipe clamp-on transducer set, 6 to 25 mm (1.4 to 1")

FD-400C-SML-50FT

AUD3,235.00

Availability: 6 weeks

Small-pipe clamp-on transducer set, 6 to 25 mm (1.4 to 1") 15 m (50')

FD-400C-SML-100FT

AUD3,470.00

Availability: 6 weeks

Small-pipe clamp-on transducer set, 6 to 25 mm (1.4 to 1") 30 m (100')

FD-400C-STD-HT

Consult Sales

Availability:

Standard-size clamp-on transducer set for high temperature, 25 to 3050 mm (1 to 120")

FD-400C-STD-HT-50FT

Consult Sales

Availability:

Standard-size clamp-on transducer set for high temperature, 25 to 3050 mm (1 to 120") 15 m (50')

FD-400C-STD-HT-100FT

Consult Sales

Availability:

Standard-size clamp-on transducer set for high temperature, 25 to 3050 mm (1 to 120") 30 m (100')

FD-400C-SML-HT

Consult Sales

Availability:

Small-pipe clamp-on transducer set for high temperature, 6 to 25 mm (1.4 to 1")

FD-400C-SML-HT-50FT

Consult Sales

Availability:

Small-pipe clamp-on transducer set for high temperature, 6 to 25 mm (1.4 to 1") 15 m (50')

FD-400C-SML-HT-100FT

Consult Sales

Availability:

Small-pipe clamp-on transducer set for high temperature, 6 to 25 mm (1.4 to 1") 30 m (100')

Insertion-Style Transducers and Accessories

FD-400I-8

Consult Sales

Availability:

Insertion transducer sensor 8"

FD-400I-18

Consult Sales

Availability:

Insertion transducer sensor 18"

FD-400I-18-50 FT

Consult Sales

Availability:

Insertion Transducer sensor 18" with 50 feet of cable

FD-400I-28

Consult Sales

Availability:

Insertion transducer sensor 28"

FD-400I-38

Consult Sales

Availability:

Insertion transducer sensor 38"

FD-400I-48

Consult Sales

Availability:

Insertion transducer sensor 48"

FD-400I-CR-18

Consult Sales

Availability:

Insertion crank for FD-400I-18

FD-400I-CR-28

Consult Sales

Availability:

Insertion crank for FD-400I-28

FD-400I-CR-38

Consult Sales

Availability:

Insertion crank for FD-400I-38

FD-400I-CR-48

Consult Sales

Availability:

Insertion crank for FD-400I-48

FD-400I-BV

Consult Sales

Availability:

Bronze valve isolation kit 11.2 NPT

FD-400I-SFK

Consult Sales

Availability:

Probe insertion fitting seal kit

FD-400I-SSV

Consult Sales

Availability:

Stainless steel valve isolation kit 11. NPT

Acoustic Couplant for Sensor Mounting

FD-GREASE

AUD52.59

Availability: 1 week

Replacement acoustic couplant for sensor mounting, max temperature 65C (150F), 6 g (.2 oz) pillow pack

FDT-GREASE

AUD133.31

Availability: 1 week

Acoustic couplant for sensor mounting, max temperature 65C (150F), 150g (5.3 oz) tube

FDT-HT-GREASE

AUD301.00

Availability: 1 week

Acoustic couplant for sensor mounting, max temperature 200C (392F), 56.7g (2 oz) tube

FDT-NS-GREASE

AUD134.00

Availability: 5 weeks

Non-silicone acoustic couplant for sensor mounting, 79 g (2.8 oz) tube

† All amounts shown in AUD
Note: Meters come complete with wall mount bracket, NIST Certificate, and operator's manual.

Clamp-on Transducer Sets come complete with acoustic couplant.

For 24 Vdc power, add suffix "-24VDC" to model number, no additional cost.

For 230 Vac power, add suffix "-230VAC" to model number, no additional cost.

FD-400C-STD sensors come with four mounting straps.

FD-400C-SML sensors do not come with mounting straps.

Armored cable and longer lengths available; consult Omega Flow Engineering.

For insertion-style transducers with 15 m (50') of cable, add suffix "-50FT" to model number, add $95 to the price.

For insertion-style transducers with 30 m (100') of cable, add suffix "-100FT" to model number, add $221 to price.

Ordering Example: (1) FD-400 Ultrasonic rate and totalizer, AUD4,252.64 plus (1) FD-400C-STD Standard-size clamp-on transducer set, 25 to 3050 mm (1 to 120, AUD2,279.19, AUD4,252.64 + 2,279.19 = AUD6,531.83