The FL-1500A series has been discontinued. Please contact our FLOW Engineering department.
OMEGA FL-1500 flow meters combine 2% accuracy and side plate construction at an economical price.
These flowmeters feature glass and 316 stainless steel construction, with aluminum side plates and acrylic plastic shields.
The float design provides high immunity to viscosity variation, and the NPT thread connections provide easy installation into
industrial and laboratory systems.
Scale: Fused on metering tube, 10 to 100% of flow scale
Metering Tube: Borosilicate glass
Float and Float Stops: 316 Stainless Steel
Standard: 316 Stainless Steel
Side Plate: Aluminum shields; acrylic plastic shields, front and back
FL-1501 and FL-1502: 20.68 bar (300 psig)
FL-1503: 12.06 bar (175 psig)
FL-1504: 6.9 bar (100 psig)
Max Temperature: 121°C (250°F)
Accuracy: ±2% full scale
Repeatability: ±0.5% full scale
† All amounts shown in AUD
Note: Comes complete with operator's manual.
For models with brass end fittings, add suffix "-B" to the model number, subtract $150 from price.
Part Number Builder
Build Your Part Number Below
Range select from:1
for 0.317-3.17 SCFM air/0.078-0.78 GPM water2
for 0.588-5.88 SCFM air/0.145-1.45 GPM water3
for 1.045-10.45 SCFM air/0.253-2.53 GPM water4
for 2.576-25.76 SCFM air/0.628-6.28 GPM water
End Fittings select from:Nothing(leave field blank)
for 316 SS (standard)-B
for Brass (optional)
Note: All combinations may not be valid, check spec sheet for valid part numbers.