Fluidized Sand Bath Calibrators

FSB Series

^AUD15,200.00 FSB-3

PLACE ORDER

Two Temperature Ranges: 122 to 662°F (50 to 350°C) 122 to 1112°F (50 to 600°C)
Safe, Clean, Dry Heat
Burn-Out Protection
Stainless Steel Containers
Inconel-Sheathed Immersion Heaters
Built-in Pressure Switch and Overload Fuse
Rugged, Heavy-Duty, Accurate
Spill Flanges Standard on all Models

Calibration Equipment - View related products

Description

When fluidized solids are heated, heat is distributed quickly and evenly throughout the bath and transferred rapidly to objects submerged in the bath. The bath temperature can be adjusted easily to the point at which you wish to calibrate or run a test.

Fluidized baths for laboratories and instrument shops provide safe, rapid heat transfer and accurate temperature control, enabling you to efficiently and safely calibrate and maintain temperature sensitive instruments.

The principle of fluidization occurs when a gas—usually low pressure air or nitrogen—flows upward through a partially-filled chamber or retort of dry, inert particles of aluminum oxide. The gas flows at a low velocity, which sets the particles in motion, separates them, then suspends them to a stable level to give the particles the appearance of turbulence quite similar to the state of boiling liquid.

Besides circulating and flowing like a liquid, fluidization solids exhibit excellent heat transfer characteristics.

Model No.	Temperature Range	Working Volume dia. x depth	Overall Volume dia. x height	Power
FSB-1	50 to 350°C (122 to 662°F)	178 x 89 mm (7.0 x 3.5")	241 x 305 mm (9.5 x 12")	117 Vac (One 750 Watt Heater)
FSB-2	50 to 350°C (122 to 662°F)	229 x 114 mm (9.0 x 4.5")	292 x 470 mm (11.5 x 18.5")	117 or 240 Vac (Two 1 kW Heaters)
FSB-3	50 to 600°C (122 to 1112°F)	178 x 139 mm (7.0 x 5.5")	330 x 457 mm (13 x 18")	117 or 240 Vac (Two 750 Watt Heater)
FSB-4	50 to 600°C (122 to 1112°F)	229 x 381 mm (9.0 x 15.0")	381 x 660 mm (15 x 26")	240 Vac (Four 1 kW Heaters)

Fig. 1 - Pressure Regulator, Specify PRG200-25 and Fig. 2 - Air Compressor, Specify FSB-C-804

Pressure Regulator
Reduces the pressure of air from air line to suit the fluidized bath. The Regulator is supplied with a pressure gauge reading from 0 to 30 lb/in2 and a built-in air filter. Specify PRG200-25.

Air Compressor
For those who do not have a convenient air line, this oil-less unit with self-lubricating carbon vanes provides the proper air supply to fluidize the laboratory units. Specify FSB-C-804.

NOTE: HEAVY WEIGHT - OVERWEIGHT SHIPPING CHARGES APPLY FOR THIS PRODUCT. IF ORDERED ON-LINE INTERNET SALES WILL CONTACT YOU AFTER ORDER PLACEMENT UNLESS YOU OPT TO CHARGE FREIGHT TO YOUR CARRIER ACCOUNT.

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.

Qty

Description

FSB-3

AUD15,200.00

Availability: 15 weeks

Fluidized Sand Bath Termperature Probe Calibrator, 122 to 1112°F (50 to 600°C) Temperature Range, 240Vac Power

FSB-3-240V

Consult Sales

Availability:

Fluidized Sand Bath, 240V

FSB-4

AUD20,660.95

Availability: 13 weeks

Fluidized Sand Bath Termperature Probe Calibrator, 122 to 1112°F (50 to 600°C) Temperature Range, 240Vac Power

Accessories

FSB-A-20

Consult Sales

Availability:

Replacement Sand - 20 pound Aluminum Oxide

FSB-A-34

Consult Sales

Availability:

Replacement Sand - 34 pound Aluminum Oxide

FSB-F-784-A

AUD342.81

Availability: 1 week

Air Filter

FSB-C-804

AUD2,895.00

Availability: 5 weeks

Air Compressor

PRG200-25

AUD338.92

Availability: 1 week

Pressure Regulator

† All amounts shown in AUD