Compact Through-Hole Bolt Load Cells, 2.50 Inch O.D.

LC8250

Compact Through-Hole Load Cells, 2.50 Inch O.D.

^AUD1,330.00 LC8250-250-3K

PLACE ORDER

Low Profile
5 Point NIST Traceable Calibration with
59 kOhm Shunt Cal Data
All Stainless Steel Construction
Rugged Industrial Design

Load Cells, Force Sensors and Torque Transducers - View related products

Description

The LC8250 Series Donut Load Cell is an economical solution to applications requiring a through-hole design. With its extremely low profile and compact design, this load cell is ideal for applications such as clamping forces, bolt loading forces and other compressive loads. This series, with its all stainless steel construction and environmental protection, features proven reliability in tough industrial applications.

SPECIFICATIONS
Output: 2 mV/V nominal
Input: 10 Vdc (15V max)
Linearity: ± 0.5% FSO
Repeatability: ± 0.1% FSO
Zero Balance: ±2.0% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.009% FSO/°C
Span: ±0.018% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Deflection: 0.076 mm (0.003") nominal
Input Resistance: 360 Ω minimum
Output Resistance: 350 ±5 Ω
Construction: 17-4 PH stainless steel
Electrical: 1.5 m (5') 4-conductor shielded cable

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

LC8250-750-1K

AUD1,330.00

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-1,000 lb capacity

LC8250-1.25-1K

AUD1,338.84

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 0.125'' ID, 0-1,000 lb capacity

LC8250-750-3K

AUD1,330.00

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-3,000 lb capacity

LC8250-750-5K

AUD1,330.00

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 0.750'' ID, 0-5,000 lb capacity

LC8250-1.00-7.5K

AUD1,330.00

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 1.00'' ID, 0-7,500 lb capacity

LC8250-1.00-10K

AUD1,340.00

Availability: 5 weeks

Thru hole load cell, 2.5'' OD, 1.00'' ID, 0-10,000 lb capacity

LC8250-500-15K

AUD1,800.00

Availability: 9 weeks

Thru hole load cell, 2.5'' OD, 0.500'' ID, 0-15,000 lb capacity

† All amounts shown in AUD
Note: All LC8250 load cells include a NIST traceable calibration certificate.
Ordering Example: (1) LC8250-750-2K is a 2,000 lb capacity load cell with 2.50'' O.D. and 0.750'' I.D., AUD1,330.00

Part Number Builder

Build Your Part Number Below

	(1)		(2)
LC8250-		-

Option Descriptions:

(1) Inside Diameter select from:
250 for 0.250 inch ID
375 for 0.375 inch ID
500 for 0.500 inch ID
625 for 0.625 inch ID
750 for 0.750 inch ID
875 for 0.875 inch ID
938 for 0.938 inch ID
1.00 for 1.00 inch ID
1.13 for 1.13 inch ID
1.25 for 1.25 inch ID
1.38 for 1.38 inch ID
1.50 for 1.50 inch ID

(2) Load Range select from:
1K for 0-1000 lb range
2K for 0-2000 lb range
3K for 0-3000 lb range
5K for 0-5000 lb range
7.5K for 0-7500 lb range
10K for 0-10000 lb range
15K for 0-15000 lb range
20K for 0-20000 lb range
30K for 0-30000 lb range
40K for 0-40000 lb range
50K for 0-50000 lb range
75K for 0-75000 lb range
100K for 0-100000 lb range

Note: All combinations may not be valid, check spec sheet for valid part numbers.