Thermocouple Connectors - Standard Size
Thermocouple Connectors and Panel Systems - View related products
Ultimate Thermocouple Connector Plug or Jack
Integral Cap, Strain Relief and Cable Clamp
Combination Phillips/Slot Screws are Captive
Accepts: Stranded, Solid, TWSH, Overbraid,
or RSC Coil Cord Wire
Contact Washers for Quick Connect Wire Terminations
New Design , Quick and Easy Cable Clamp Assembly
ANSI or IEC Color Codes
Universal Female Accepts Standard or Mini Male TC Connector
OMEGA OSTW thermocouple wire connectors are round pin standard size, 2 pole TC connectors designed to connect TC wire or temperature sensor instrumentation with a temperature controller or process control HMI automation panel. They are compatible with any other similarly sized Male, 2 prong thermocouple plug or 2 pins Female thermocouple jack. The female TC jack is Universal and will accept either the mini or standard size male TC plug. Hollow pins of thermocouple compensating alloy are used. This TC connector is also available with a solid 2 pin design.
Thermocouple connector plug or jack with ANSI color code Type K Yellow, Type J Black, Type T Blue, Type E Purple, Type N Orange, Type R/S Green, Type C Red, Thermocouple Connector Color Codes with compensating alloy per ANSI, ASTM and IEC are stocked.
This Ultimate Thermocouple Connector design OSTW-CC is ideal for fast and easy connection of TC cable or thermocouple wire via a TC cable clamp assembly. The cap/clamp contains the 4 captive screws and eliminates the loose screws typical with a traditional metal thermocouple cable clamp. Single Connector Pack Included are a metal backplate clamp, strain relief, and grommets.
For Bulk packaging, the Connector & Clamp grommets Sold Separately
|| 2.36 (0.093)
|| 7.11 (0.28)
|| 3.18 (0.125)
|| Silicone Wire Grommet (strain relief)
* Insert package QTY : Select from 5,10,50,100
† All amounts shown in AUD
Note: Order male and female separately to create pairs.
To order Solid Pin Male Connectors: Add suffix “-S” to the model number.
IEC color code connectors available. Add "I" to the calibration code letter example "-KI- or -JI-" for a male or female connector . Example K IEC male is "OSTW-CC-KI-M"
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ordering Example: (1) OSTW-CC-K-M Type K, Male, Glass Filled Nylon Standard Connector with Write On Window and Cable Clamp Cap, AUD12.00
Part Number Builder
Build Your Part Number Below
Calibration select from:J
for Type JK
for Type KT
for Type TE
for Type EC
for Type CR/S
for Type R/SU
for Type UN
for Type N
Connector Type select from:M
for Male OnlyF
for Female Only
Connector Type select from:Nothing(leave field blank)
for Solid pin male connector
ROHS select from:Nothing(leave field blank)
Package QTY select from:Nothing(leave field blank)
Note: All combinations may not be valid, check spec sheet for valid part numbers.