Multifunction Process Calibrator with RS232 Interface, High Accuracy

PCL1000

Multifunction Process Calibrator with RS232 Interface

^AUD2,991.64 PCL1000

PLACE ORDER

Excellent Accuracy ±0.6°C T/C, ±0.3°C RTD 0.015% Electrical 0.05% Pressure
Read and Source Modes
10 T/C Types; 8 RTD types plus 400 Series Thermistor
Stores up to 9 setpoints for each output function
Measures pressure using external modules

Instrumentation for Pressure and Strain Measurements - View related products

Description

SPECIFICATIONS
Operational Temp Range: 0 to 50°C (14 to 122°F)
Stability:0.01% F.S./°C outside of 23°C±5°C
Pressure Accuracy: 0.05% FS
Max Overpressure: 300%
Ports:<100 psi 1/4" barbed hose fittings,≤ 100 psi: 1/8" brass swagelok fittings
Wetted Parts: clean dry gases only
T/C Types: J,K,T,E,R,S,B,N,L,U
RTD Ranges: RTD Ranges: Pt385 (100, 200, 500, 1000Ω) Pt392, JIS, Ni120, CU10, YS1400
Ohm Ranges: 0 to 400.00 and 400.0 to 4000.0
Voltage:
(Low) I/O 0-20.000 V
(High) Input only 0-250 V ac/dc
Frequency: 0-1000.0 CPS, Hz 0-10.00 kHz
Continuity: 0 to 400.0Ω audible tone under 10Ω
Accuracy: T/C Type J: ±0.3°C ± 10µV (±0.6°C total error)
RTD Pt100: ±0.1°C ±0.075 Ω (±0.3°C total error)
Ohms (400): ±0.1 Ω
Ohms (4000): ±1.0 Ω
mA Compliance: up to 1000 Ω
Voltage Drive: 1 mA
RTD IEX-range: 0.01 mA to 3 mA
RTD Frequency Response: 10 mS
Operating Temp: -10 to 50°C
Storage Temp: -40 to 60°C
Power: 4 AA alkaline batteries (included)
Dimensions: 191x102x38 mm(7.5x4x1.5")
Weight: 350g (12oz)

External Pressure Modules*
MODEL NO.	Parameter Range Gauge (psig)	Accuracy	Over Pressure
PCL-PMA	Pressure Module adaptor (one required)
PCL-PM030G	0 to 30 (0 to 2 bar)	±0.025%	300%
PCL-PM050G	0 to 50 (0 to 3.5 bar)	±0.03%	300%
PCL-PM100G	0 to 100 (0 to 7 bar)	±0.025%	300%
PCL-PM300G	0 to 300 (0 to 20 bar)	±0.025%	200%
PCL-PM1KG	0 to 1000 (0 to 70 bar)	±0.05%	200%
PCL-PM3KG	0 to 3000 (0 to 200 bar)	±0.1%	200%
PCL-PM5KG	0 to 5000 (0 to 340 bar)	±0.1%	200%
PCL-PM015VAC	0 to -15 (0 to -1 mbar)	±0.025%, ±0.0025 psi	300%
PCL-PM015A	0 to 15 (0 to 1 bar) abs.	±0.025%, ±0.0025 psi	300%
PCL-PM030A	0 to 30 (0 to 2 bar) abs.	±0.025%	300%
PCL-PM015C	-15 to 15 (-1 to 1 bar)	±0.025%, ±0.0025 psi	300%
PCL-PM030C	-15 to 30 (-1 to 2 bar)	±0.025%, ±0.0025 psi	300%
PCL-PM030D	0 to 30 (0 to 2 bar) diff.	±0.025%	300%

* Most popluar ranges (see pressure module page for all ranges).

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PCL1000

Consult Sales

Availability:

High accuracy Multi-Function Calibrator

External Pressure Modules-
Most Popular Shown

PCL-PMA

Consult Sales

Availability:

Pressure Module Adapter (Required for pressure measurment)

700MA

Consult Sales

Availability:

Adapter to connect PCL-PMA to PCL1000

PCL-PM015A

Consult Sales

Availability:

0 to 15 psi (0 to 1 Bar) absolute pressure module

PCL-PM030G

Consult Sales

Availability:

0 to 30 psi (0 to 2 Bar) gauge pressure module

PCL-PM030C

Consult Sales

Availability:

-15 to +30 psi (-1 to +2 Bar) vacuum/pressure module

PCL-PM100G

Consult Sales

Availability:

0 to 100 psi (0 to 6.9 Bar) gauge pressure module

PCL-PM3KG

Consult Sales

Availability:

0 to 3000 psi (0-207 Bar) gauge pressure module

† All amounts shown in AUD
Note: Each unit includes: Test leads, protective rubber boot, 4 AA alkaline batteries, calibration certificate, type K thermocouple and retractable thermocouple cable, and complete instruction manual.
Ordering Example: (1) PCL1000 high accuracy multi-function calibrator, AUD2,991.64