The PR-15 series has been updated with low, high, and extreme temperature ranges; all of the new models will be PR-15(L,H,E)*. The older models have been discontinued.
Omega's RTD terminal block probe features a large terminal block connector, fitted with large pan head screws for easy termination. These are capable of direct immersion up to the block. The PR-15-series can be mounted into fixtures, pipes, ducts and other process areas by using our OMEGALOK™ compression fittings, sold separately.
† All amounts shown in AUD
Part Number Builder
Build Your Part Number Below
RANGE select from: L for LOW (-50 to 250°C) H for HIGH (-50 to 450°C) E for EXTREME (-200 to 600°C)
NUMBER OF WIRES select from: 2 for 2-WIRE 3 for 3-WIRE 4 for 4-WIRE
OHMS select from: 100 for 100 OHMS 1000 for 1000 OHMS
SHEATH DIAMETER select from: 1/8 for 1/8" DIAMETER 3/16 for 3/16" DIAMETER 1/4 for 1/4" DIAMETER
SHEATH LENGTH select from: 2 for 2 INCHES 3 for 3 INCHES 4 for 4 INCHES 6 for 6 INCHES 9 for 9 INCHES 12 for 12 INCHES 18 for 18 INCHES 24 for 24 INCHES
Note: All combinations may not be valid, check spec sheet for valid part numbers.