Call Us
Now
Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
1800 106 210  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Sanitary RTD Sensors with Thermowell Removable Sensor M12 Connector for use in CIP Clean-In-Place Processes

PRS-TW-M12 Series

Sanitary Thermowell Removable Sensor M12 Connector Assemblies for Food, dairy, Beverage and BioPharmaceutical Applications | PRS-TW-M12 Series

AUD566.57 PRS-3-100-A-TW-0163-D1-M12

PLACE ORDER
  • Sensor Includes a 4-Wire M12 Connector Plug for Attachment to Process Instrumentation. An M12 Extension Cable is Required for Installation.
  • Clean-In-Place Design for Use in Food, Dairy and Pharmaceutical Processes
  • Standard Mounting Cap is a 1½" 16AMP Tri-GripTM (Tri-Clamp® Compatible) Design, Other Cap Sizes and Styles are Available
  • Removable Probe Assembly is Spring Loaded Into the Thermowell for Good Thermal Response
  • Available with A Variety of Immersion Lengths.
  • Wetted Surfaces are 316L Stainless Steel, Surface Finish = 32 Microinch or Better
  • Process Measurement Temperature Range: -50 to 200°C (-58 to 392°F)
Sanitary - View related products

Description

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor includes a 4-Pin, M12 Connector for easy installation using an extension cable.

Sensor Specifications Include:
  • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

  • Immersion lengths of 15⁄8, 2½", 4½", 7½, and 10½" are available from stock, with others available.

  • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

  • These sensors can be used with 2-wire or 3-wire systems see information below.

  • Insulation resistance values of 100 megohms minimum at 100 VDC.


    • These sensors are supplied standard as 4-wire assemblies with 4-pin connectors.
    When used in 3-wire applications, use pins A, B and C as shown in the wiring detail below.
    When used in 2-wire systems, connect one wire to pins A or B, and the other wire to pins C or D as shown below.

    Wiring Diagram
    Place Order(Specify Model Number)

    What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

    Part Number/ Desc.
    Qty
    Description
      
    PRS-3-100-A-TW-0163-D1-M12
    AUD566.57
    Availability: 6 weeks
     
    Removable Pt100 RTD sensor with 1½" 16AMP cap, 15⁄8" immersion length (U dimension) thermowell, spring loaded with M12 connector
      
    PRS-3-100-A-TW-0250-D1-M12
    AUD616.38
    Availability: 6 weeks
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 2½" immersion length (U dimension) thermowell, spring loaded with M12 connector
      
    PRS-3-100-A-TW-0450-D1-M12
    AUD660.00
    Availability: 6 weeks
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 4½" immersion length (U dimension) thermowell, spring loaded with M12 connector
      
    PRS-3-100-A-TW-0750-D1-M12
    AUD750.00
    Availability: 6 weeks
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 7½" immersion length (U dimension) thermowell, spring loaded with M12 connector
      
    PRS-3-100-A-TW-1050-D1-M12
    AUD821.84
    Availability: 6 weeks
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 10½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Accessories
    Click to expand/minimize a list of what others bought with theTX-M12-RTD-C-1
    TX-M12-RTD-C-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA Output) with M12 Connections
      
    TX-M12-RTD-V-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10 VDC Output) with M12 Connections
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-S-F-2
    M12C-PUR-4-S-F-2
    AUD34.92
    Availability: 1 week
     
    2 Meter extension cable, polyurethane jacket with 4-pin M12 female connector
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-S-F-5
    M12C-PUR-4-S-F-5
    AUD42.82
    Availability: 1 week
     
    5 Meter extension cable, polyurethane jacket with 4-pin M12 female connector
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-R-F-5
    M12C-PUR-4-R-F-5
    AUD43.45
    Availability: 1 week
     
    5 Meter extension cable, polyurethane jacket with right angled 4-pin M12 female connector
    Click to expand/minimize a list of what others bought with theM12C-PVC-4-S-F-5
    M12C-PVC-4-S-F-5
    AUD38.87
    Availability: 1 week
     
    5 Meter extension cable, PVC jacket with 4-pin M12 female connector
    Click to expand/minimize a list of what others bought with theM12C-PVC-4-R-F-5
    M12C-PVC-4-R-F-5
    AUD41.06
    Availability: 1 week
     
    5 Meter extension cable, PVC jacket with right angled 4-pin M12 female connector

    Order By Part Number

    Part Number
    Qty
    Part Number
    Qty


    † All amounts shown in AUD
     Note: For other cap sizes or styles, other immersion lengths, or for thermistor versions of this product, please contact Sales.

     Ordering Example: (1) PRS-3-100-A-TW-0163-D1-M12 Removable 4-wire Pt100 RTD sensor (100 O at 0°C, Class A accuracy) spring loaded in a 1½, AUD566.57

    Part Number Builder

    Build Your Part Number Below
    Option Descriptions:


    (1) Nominal Element Resistance select from:
    100 for 100 ohm @ 0 C (standard)
    1000 for 1 kohm @ 0 C

    (2) Accuracy select from:
    A for Class A Accuracy

    (3) Insertion Length select from:
    0163 for 1-5/8" insertion (2-1/2" well stem length)
    0250 for 2-1/2" insertion (4" well stem length)
    0450 for 4-1/2" insertion (6" well stem length)
    0750 for 7-1/2" insertion (9" well stem length)
    1050 for 10-1/2" insertion (12" well stem length)
    Note: All combinations may not be valid, check spec sheet for valid part numbers.
    We noticed you are from the US. Visit your local site for regional offers and live support.
    Stay here.
    Go to the the US site >