High Pressure Flush Diaphragm Transmitter

PX44-I

PLACE ORDER

Stainless Steel Construction
Food Processing or Industrial Applications
High Pressure Flush Diaphragm for Measurement of Difficult Fluids
10 ft (3m) Cable with Conduit Connection for Installation in Harsh Environments
Heavy Duty 1/2 NPT Fitting
4-20 mA Output for Noise Free Transmission

Pressure Transducers - View related products

Description

This item is discontinued.

OMEGA's PX44 is a high accuracy, current output, industrial pressure transmitter with a high-pressure flush diaphragm for use with industrial fluids and slurries. It's hermetically sealed, all stainless steel construction makes it suitable for the harshest environments. Ten feet of two-conductor shielded cable is standard, with a second ½ NPT fitting on the body for conduit installation. Pressure ranges from 0 to 500 up to 0 to 5000 psi are available to cover most industrial applications.

The PX44 is also available in metric configurations, with G½ port, and models from 0-40 to 0-350 bar pressure ranges. Please see the PXM44 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
Excitation: 10 to 40 Vdc
Output: 4 to 20 mA ±10% adj
Zero Balance: 4 mA +10% -2% adj
Accuracy: 0.5% linearity, hysteresis and repeatability combined
Operating Temp Range: -46 to 121°C (-50 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Span: 0.003% of rdg/°F
Zero: 0.0045% of FSO/°F
Proof Pressure: 150% of range
Burst Pressure: 300% of range
Wetted Parts: 17-4 PH with 316 stainless steel diaphragm
Pressure Port: ½-14 NPT male
Electrical Connection: 3 m (10') 2-conductor shielded cable with ½-14 NPT fitting

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PX44E0-300GI

Consult Sales

Availability:

300 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-500GI

Consult Sales

Availability:

500 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-500SI

Consult Sales

Availability:

500 psi Sealed Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-1KGI

Consult Sales

Availability:

1000 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-1KSI

Consult Sales

Availability:

1000 psi Sealed Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-1.5KGI

Consult Sales

Availability:

1500 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-2KGI

Consult Sales

Availability:

2000 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-2.5KGI

Consult Sales

Availability:

2500 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-3KGI

Consult Sales

Availability:

3000 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

PX44E0-5KGI

Consult Sales

Availability:

5000 psi Gage Pressure transducer with Stainless Steel wetted parts, 10 ft (3m) cable and 4-20 mA output

† All amounts shown in AUD
Note: Metric Ranges Available - Consult Engineering

Part Number Builder

Build Your Part Number Below

	(1)	(2)
PX44E0-			I

Option Descriptions:

(1) Range (psi) select from:
500 for 0-500
1K for 0-1000
1.5K for 0-1500
2K for 0-2000
2.5K for 0-2500
3K for 0-3000
5K for 0-5000

(2) Units select from:
G for Gage Model
A for Absolute Model
S for Sealed Gage Model

Note: All combinations may not be valid, check spec sheet for valid part numbers.