Discontinued - Diffused Semiconducter Pressure Transmtter, Metric, 0-1 to 0-25 bar, mV/V Output

PXM6000 Series Metric, mV/V

High Reliability
Long Term Stability
All Stainless Steel Case
Vacuum Range Available
Built-In Temperature Sensor

Pressure Transducers - View related products

Description

OMEGA’s PXM6000 Series Pressure Transducer fits easily into your application. This low cost transducer is small and light, and mounting requires no bulky structures. The sensor is a small, about 2.5 mm square, silicon chip with four diffused strain gauges, mounted in the stainless steel case. Laser trimmed resistors provide temperature compensation and adjust zero balance and span. The 30 mV output easily is compatible with most amplifiers and data acquisition systems The PXM6000 uses solid state media isolation for improved reliability. Thin films of chemically inert materials are deposited or grown on the chip surface to provide electrical isolation between the sensor and pressure medium. The sensor is less sensitive to vibration and more dependable in high shock environments because the films add no significant mass. Corrosion resistance is outstanding, and the isolation will remain effective because there is no gel or oil column to deteriorate.

The PXM6000 is also available in standard/imperial configurations, with 1/8 or 1/4 NPT, MS33656-4 or MS33649-4 ports, and models from 0-15 to 0-300 psi pressure ranges. Please see the PX6000 for complete details, or contact our Pressure department for more information..

SPECIFICATIONS
Excitation: 10 Vdc Regulated
Output: 3 mV/V ±10%
Input Resistance: 2500 Ohms minimum
Output Resistance: 1000 to 1500 Ohms
Zero Balance: 0 mV ±5% FSO
Dielectric Isolation Resistance: 100 MOhms Mminimum at 45 Vdc
Temperature Sensor: Resistance @ 24°C (75°F) 900 to 1500 Ω
Temperature Coefficient: 8% to 10%. per 55.6°C(100°F)
Accuracy: ± 0.25% FS for all ranges (Linearity, Hysteresis and Repeatability combined )
Operational Temp Range: -54° to 150°C (-65 ° to 300°F)
Compensated Temp Range: -54° to 121°C (-65° to +250°F)
Thermal Effects:
Span: = ± 0.04% of FSO/°C
Zero: = ± 0.04% of FSO/°C
Vibration Sensitivity: At 35g peak sinusoidal vibration from 10 Hz to 2000 Hz ( 1/2" D.A.), the output shall not exceed 0.04% FSO/g for 1 bar range to 0.005% FSO/g for 7 bar and above
Natural Frequency: Greater than 35 kHz for 7 bar and above
Shock: 100g, 11 milliseconds half sine wave without damage
Proof Pressure: 2.0 times rated pressure will not cause changes in performance beyond the specified tolerances
Burst Pressure: 3.0 times rated pressure for pressure ranges below 14 bar, or 2.5 times rated pressure for pressure ranges above 14 bar will not cause rupture of the pressure sensor
Wetted Parts: 316 Stainless Steel, Silicon Nitride, pyrex glass, epoxy, Kovar
Electrical Connection:
Style "0" = 0.6 m (2 ft) cable
Style "1" = PT1H-10-6P connector
Style "6" = micro DIN Connector
Pressure Port: G 1/4 Male (std)
Optional: G 1/4 Female, G 1/8 Male or Female
Weight: 113 g (4 oz.)
Mating Connector:
Style "1" = PT06F10-6S (not inlcuded)
Style "6" Micro DIN mating connector included

For special options consult Sales or Pressure Engineering.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PXM6000MC6-001BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-1 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-1.60BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-1.6 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-004BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-4 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-006BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-6 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-010BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-10 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-016BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-16 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-025BARAV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-25 Bar absolute pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-001BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-1 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-1.60BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-1.6 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-004BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-4 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-006BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-6 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-010BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-10 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-016BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-16 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

PXM6000MC6-025BARGV

Consult Sales

Availability:

Diffused semiconductor transducer, 0-25 Bar gauge pressure range, G 1/4 male fitting, micro DIN connector and 3mV/V output

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

	(1)	(2)		(3)		(4)	(5)
PXM6000			-		BAR

Option Descriptions:

(1) Pressure Port select from:
MA for G 1/8 male
MB for G 1/8 female
MC for G 1/4 male
MD for G 1/4 female

(2) Electrical Connection select from:
0 for 0.6 meter shielded cable
1 for PT1H-10-6P connector or equivalent (mating connector sold separately)
3 for 4 pin solder eyelet(no temp. sensor)
6 for micro DIN connector (mating connector included/no temp sensor)

(3) Pressure Range (Bar) select from:
001 for 0 to 1 Bar
1.60 for 0 to 1.6 Bar
004 for 0 to 4 Bar
006 for 0 to 6 Bar
010 for 0 to 10 Bar
016 for 0 to 16 Bar
025 for 0 to 25 Bar

(4) Pressure Units select from:
A for Absolute pressure
G for Gauge pressure
S for Sealed gauge pressure

(5) Output select from:
V for 3 mV/V nominal
5T for 0 to 5 Vdc
I for 4 to 20 mA

Note: All combinations may not be valid, check spec sheet for valid part numbers.