Heavy Duty Threaded Thermowell for 1/4 Inch Diameter Elements

SERIES 260HL

^AUD110.00 3/4-260HL-U21/2-BRASS

Available in Carbon Steel and Stainless Steel
Standard Insertion Lengths from 2 1/2 to 19 1/2 Inches
3/4 Inch and 1 Inch External NPT Thread

Thermowells and Head and Well Assemblies - View related products

Description

Application:
Standard length, 1/4" bimetal thermometers. #20 gage thermocouple elements. Unarmored liquid-in-glass test thermometers. Other temperature-sensing elements having .252 in. maximum diameter.

Connection Size:
3/4" NPT and 1" NPT are standard. Other thread sizes are available upon request.

Materials:
Brass (ASTM B-16), Carbon Steel (C-1018), Stainless Steel A.I.S.I. 304 & A.I.S.I. 316, Monel. Wells are also available in special materials; prices on request.

Series 260HL—Lagging Extension Type
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

Ext. Th'd P	Model No.	Lag. Ext. T	Elem. Lgth. A	Insert. Lgth. U	Shank Dia. Q
3/4" NPT	3/4-260HL-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2	7/8 7/8 7/8 7/8 7/8 7/8
1" NPT	1-260HL-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2	1 1/16 1 1/16 1 1/16 1 1/16 1 1/16 1 1/16

Maximum Fluid Velocity—feet per second

Well Type	Material	Insertion Length – “U”
Well Type	Material	2 1/2	4 1/2	7 1/2	10 1/2	13 1/2	16 1/2	19 1/2	22 1/2
3/4" - 260H and 3/4" - 260HL	Brass	305 (97.5)	93.8 (54.1)	33.9	17.1	10.5	7	5	3.7
	Carbon Steel	386 (175)	180 (97.2)	65.3 (58.3)	33	20.1	13.4	9.6	7.1
	A.I.S.I. 304 & 316	440 (243)	197 (135)	71.2	36	22	14.7	0.5	7.8
	Monel	354 (195)	155 (108)	56.1	28.4	17.3	11.6	7.5	5.6
1" - 260H and 1" - 260HL	Brass	354 (161)	108 (89.5)	39.4	19.8	12.2	8.1	5.8	4.3
	Carbon Steel	448 (289)	209 (161)	75.7	38.4	23.3	15.5	11.1	8.2
	A.I.S.I. 304 & 316	490 (403)	228 (225)	82.5	41.8	25.5	17.1	12.2	9.1
	Monel	410 (322)	179 (178)	65.1	33	20.1	13.5	8.7	6.5

Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

3/4-260HL-U21/2-BRASS

AUD110.00

Availability: 9 weeks

Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Brass

3/4-260HL-U21/2-CS

AUD110.00

Availability: 9 weeks

Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Carbon Steel

1-260HL-U191/2-304SS

AUD525.00

Availability: 9 weeks

Heavy Duty Thread Well, 1" NPT, 19 1/2 Insertion length, 304 SS

† All amounts shown in AUD

Part Number Builder

Build Your Part Number Below

(1)		(2)		(3)
	-260HL-U		-

Option Descriptions:

(1) External thread - NPT select from:
3/4 for 3/4 in.
1 for 1 in.

(2) Insertion length dimension select from:
21/2 for 2 1/2 in.
41/2 for 4 1/2 in.
71/2 for 7 1/2 in.
101/2 for 10 1/2 in.
131/2 for 13 1/2 in.
191/2 for 19 1/2 in.

(3) Material select from:
304SS for 304 SS
316SS for 316 SS
CS for Carbon Steel
BRASS for Brass

Note: All combinations may not be valid, check spec sheet for valid part numbers.