High Temperature Foundry Thermocouple Probes

SP-HF-K Series

^AUD666.19 SP-HF-K-6

PLACE ORDER

Type K, CHROMEGA™-ALOMEGA™ Thermocouple Elements
Measures Hot Metal Surfaces
Rated up to (1260°C) 2300°F
Extra Heavy-Duty Design
1/4" Diameter Contact Elements
Works with High Temperature Impedance Type K Temperature Readouts
Rugged, Heavy-Duty Aluminum Handle

Thermocouples - View related products

Description

Specifically designed for use where surface temperatures reach up to 1260°C (2300°F) and rough handling is routine, OMEGA’s Foundry Probe uses large, heavy-duty tips that can penetrate surface slag to measure the true temperature of the casting. The surface to be measured must be electrically conductive. The thermocouple's lead wires are 16-gage stranded wire with high temperature insulation and stainless steel overbraiding for added protection.

Note: Will not work with analog display systems requiring 10 or 15 ohm input impedance.

Specifications
Calibration: Type K, CHROMEGA™-ALOMEGA™ Maximum Temperature: 1260°C (2300°F)
Contacts: 1/4" pointed Lead Wire: 183 cm (6'), stainless steel overbraiding
Probe Length: 762 mm (30")
Handle: Rugged Aluminum, type HDX

View the Thermocouple Accuracy and Color Code charts

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

SP-HF-K-6

AUD666.19

Availability: 1 week

Foundry probe with spade lugs termination

SP-HF-K-6-OST-M

AUD684.87

Availability: 6 weeks

Foundry probe with OST male connector termination(OST connectors use an economical hollow pin design)

† All amounts shown in AUD
Note: Probe Tips Must Contact Measurement Surface for Accurate Readings
Ordering Example: (1) SP-HF-K-6-OST-M high temperature foundry probe, type K, 6 inches long with an OST male standard size connector long with an OST male standard size, AUD684.87