Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Strain Gauge Adhesive Kit

Strain Gage and Transducer Accessories

Strain Gauge Adhesive Kit | Strain Gage and Transducer  Accessories

Strain Gauge Adhesive Kit

  • Bridge Completion Resistors
  • Strain Gage Adhesives
  • Resistance Wire for Temperature Compensation and Zero Balance
Strain Gages, Accessories and Instrumentation - View related products

Description

TERMINAL PADS
Terminal pads serve two main purposes. First, they act as intermediate points for attaching ribbon leads of thin gage wire to heavier instrumentation wires. Second, they provide stress relief to strain gage systems. When the heavy instrumentation wire moves, the terminal pad protects the strain gage.

FIXED BRIDGE COMPLETION RESISTORS
Accuracy:0.1%
Temperature Compensation: 5 ppm (-20 to 80°C/-4 to 176°F)
Power: 1 /4 watt.

ADHESIVES
OMEGA’s TT300 cement is a heat-cured, two-part epoxy adhesive which can be used to bond polyimide backed strain gages for strain measurement up to 200°C (392°F). Each TT300 kit contains 2 bottles of resin and hardener which are premeasured to insure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for one minute. A bottle each of hardener and resin produce approximately 3 /4 oz. of adhesive. The shelf life of the resin-hardener mixture is six weeks at room temperature. The shelf life of the unmixed components is indefinite, provided the bottles are kept tightly sealed. Each TT300 kit includes 2 oz. of Acetone, Acid Primer, Neutralizer and Rosin Solvent for cleaning and preparing the surface, as well as two funnels and two cap brushes. SG496 and SG401 are general purpose cold-curing one-part glues. They are the easiest and most commonly used adhesive for strain gages. They cure in one minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate and SG496 is a methyl-based cyanoacrylate. There is a one-year shelf life at cool room temperature, but increased shelf life can be obtained by cold storage. The glue temperature range is -65 to 180°F (-54 to 82°C).

NOTE: Additional Hazardous Materials carrier handling surcharges may apply for adhesive products on this page. You will be contacted by Internet Sales to confirm after the order is placed.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/ Desc.
Qty
Description
  
TP-1
Consult Sales  
Availability: 
 
 
single terminal pad pair, pkg of 10
  
TP-2
Consult Sales  
Availability: 
 
 
two terminal pad pairs, pkg of 10
  
TP-3
Consult Sales  
Availability: 
 
 
three terminal pad pairs, pkg of 10
  
TP-4
Consult Sales  
Availability: 
 
 
four terminal pad pairs, pkg of 10
  
TP-5
Consult Sales  
Availability: 
 
 
five terminal pad pairs, pkg of 10
  
TP-6
Consult Sales  
Availability: 
 
 
six terminal pad pairs, pkg of 10
  
RES-120
AUD30.31
Availability: 1 week
 
120 Ohm bridge completion resistors
  
RES-250
AUD29.00
Availability: 1 week
 
250 Ohm bridge completion/4-20 mA shunt resistors
  
RES-350
AUD28.69
Availability: 1 week
 
350 Ohm bridge completion resistors
Click to expand/minimize a list of what others bought with theTT300
TT300
Consult Sales  
Availability: 
 
 
Adhesives
Click to expand/minimize a list of what others bought with theSGB-36
SGB-36
AUD191.43
Availability: 1 week
 
36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C
Click to expand/minimize a list of what others bought with theSGC-36
SGC-36
Consult Sales  
Availability: 
 
 
36 gage Copper wire (1500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C
Click to expand/minimize a list of what others bought with theSGM-36
SGM-36
AUD64.78
Availability: 9 weeks
 
36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C
All amounts shown in AUD
Note: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual

Product Manuals:

Download TT300 Series - Adhesive Kit
Download SG401 and SG496 - Rapid Cure Strain Gauge Adhesives
We noticed you are from the US. Visit your local site for regional offers and live support.