Fine Diameter (0.01 in. - 0.04 in.) Rugged Thermocouple Transition Joint Probes

TJ36 Series - Fine Diameters

Fine Diameter Thermocouple Transition Joint Probes

Diameters as small as 0.25mm (0.010") !
Probes Available in E, J, K, N, and T Calibrations
304 SS and Inconel^® 600 sheaths
Additional Sheaths Available: 310 SS, 316 SS, 321 SS, Hastelloy^® X, and Super OMEGACLAD™ XL
Type K and N cand be manufactured with OMEGACLAD™ Compacted Mineral Insulation Cable for Long-Lasting Performance in Harsh Conditions
Spring Strain Relief Prevents "Pinching" of the Wire
1 m (40") Lead Length, Stripped Leads

Sensors - View related products

Description

OMEGA's fine diameter transition joint thermocouple probes provide durability and fast, accurate temperature measurements. Diameters as small 0.25mm (0.010") allow "pin-point" accuracy of measured values while protecting the measurement junction inside the metal sheathing and mineral insualtion of the OMEGACLAD™ cable . The metal transition barrel provides a solid mounting surface and the PFA insulated lead wire is a cost-effective solution for environmental temperatures to 260°C (500°F). For extended life, low drift operation at higher temperatures, choose Super OMEGACLAD™ XL sheathing, available in Type K and N calibrations.

Calibration ANSI Code	Sheath Materials	Sheath Dia. mm (in.)	T/C Junction Upper Temp. °C (°F)	Model Number (See notes, below)
K CHR- AL	304SS	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	500 (932) 700 (1290) 700 (1290) 700 (1290)	TJ36-CASS-010()-() TJ36-CASS-020()-(*) TJ36-CASS-032()-(*) TJ36-CASS-040()-(**)
	Inconel^® 600	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	500 (932) 700 (1290) 700 (1290) 700 (1290)	TJ36-CAIN-010()-() TJ36-CAIN-020()-(*) TJ36-CAIN-032()-(*) TJ36-CAIN-040()-(**)
	Super OMEGACLAD™ XL	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	600 (1112) 800 (1472) 800 (1472) 800 (1472)	TJ36-CAXL-010()-() TJ36-CAXL-020()-(*) TJ36-CAXL-032()-(*) TJ36-CAXL-040()-(**)
J Iron- Constantan	304SS	0.25 (0.010) 0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	260 (500) 260 (500) 260 (500) 260 (500)	TJ36-ICSS-010()-() TJ36-ICSS-020()-(*) TJ36-ICSS-032()-(*) TJ36-ICSS-040()-(**)
T Copper- Constantan	304SS	0.50 (0.020) 0.80 (0.032) 1.00 (0.040)	260 (500) 260 (500) 260 (500)	TJ36-CPSS-020()-() TJ36-CPSS-032()-(*) TJ36-CPSS-040()-(**)

Notes: *Specify Junction: (G)rounded, (E)xposed or or (U)ngrounded.
**Specify length in inches: 6 for 150 mm (6 in.), 12 for 300 mm (12 in.),
Super OMEGACLAD™ XL probes (highlighted in yellow) are also available in N calibration; substitute "NN" for CA in Model Number.

View the Thermocouple Accuracy and Color Code charts

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

TJ36-CASS-040U-6

AUD102.57

Availability: 1 week

TJ36 Probe (Type K calibration) with 304SS Sheath,1.00 mm (0.040 in.) dia., 150 mm (6 in.) ength, ungrounded tip

TJ36-CASS-010G-12

AUD180.56

Availability: 1 week

TJ36 Probe (Type K calibration) with 304 SS Sheath, 0.25 mm (0.010in.) dia., 300 mm (12 in.) length, grounded tip

TJ36-CAIN-032U-6

AUD108.34

Availability: 7 weeks

TJ36 Probe (Type K calibration) with Inconel^® Sheath, 0.80 mm (0.032 in.) dia., 150 mm (6 in.) length, ungrounded tip

TJ36-ICSS-040G-12

AUD100.00

Availability: 7 weeks

TJ36 Probe (Type J calibration) with 304 SS Sheath, 1.0 mm (0.040 in.) dia., 300 mm (12 in.) length, grounded tip

TJ36-CAXL-032U-12

AUD119.54

Availability: 7 weeks

TJ36 Probe (Type K calibration) with Super OMEGACLAD™ XL Sheath, 0.80 mm (0.032 in.) dia., 300 mm (12 in.) length, ungrounded tip

† All amounts shown in AUD
Ordering Example: (1) TJ36-CAXL-040G-6 Type K Rugged Fine Diameter Thermocouple Transition Joint Probe with PFA Stripped Lead Wire, 1 m (40 inches) length; Super OMEGACLAD™ XL sheath, 1.0 mm (.040 inch) dia., 150 mm (6 inches) length, ungrounded tip, AUD111.00

Part Number Builder

Build Your Part Number Below

	(1)		(2)	(3)		(4)	(5)		(6)
TJ		-			-			-

Option Descriptions:

(1) Lead Wire Length select from:
36 for 36 inches(standard)
CUSTOM for custom length in inches(whole number only up to 600 inches max)

(2) Thermocouple Type select from:
CA for Type K
CX for Type E
IC for Type J
CP for Type T (Not available with 010 diameter)
NN for Type N (Only available with XL and IN sheath)

(3) Sheath Material select from:
SS for 304 SS
IN for Inconel®
XL for Super OMEGACLAD™ XL (Only available with Thermocouple Type K and N)

(4) Probe Diameter select from:
010 for 0.010 in. (0.25 mm)
020 for 0.020 in. (0.50 mm)
032 for 0.032 in. (0.80 mm)
040 for 0.040 in. (1.00 mm)

(5) Junction Type select from:
E for Exposed
G for Grounded
U for Ungrounded

(6) Length select from:
6 for 6 in. (150 mm)
12 for 12 in. (300 mm)
CUSTOM for custom length in inches(whole numbers only from 2 to 120 inches)

Note: All combinations may not be valid, check spec sheet for valid part numbers.