Cart  |  Contact  |  Help  |  auinfo@dwyeromega.com  | 
Toll-Free in Australia: 1800 106 210
International+65 6415 5353

Vibration Tested High Temperature Thermistor Probes with M12 Connections

TH-22 Series

Thermistor Probes | TH-22 Series

Thermistor Probes

  • Maximum Continuous Use, 200°C (392°F) [Short Term Use to 250°C (482°F)] for Probe and Connector
  • Vibration Tested to ASTM-E1137: 3Gs from 5 to 500 Hz
  • Excellent Long Term Stability
  • Tolerance: ±0.2°C From 0 to 70°C (32 to 158°F)
  • Available in 2252, 3K, 5K and 10KΩ Resistances at 25°C (77°F)
Thermistor Elements, Probes and Assemblies - View related products

Description

The TH-22 Series thermistor probes are constructed with the 55000 Series glass encapsulated thermistor elements which provide excellent stability and accuracy. The connector design includes an LCP insert with nickel plated copper pins for high temperature applications, 200°C (392°F). With a maximum continuous temperature rating of -80 to 200°C (-112 to 392°F), and intermittent operation to 250°C (482°F), these thermistor sensors can be used in applications previously out of reach of epoxy coated thermistor sensors. The probes can be ordered in any length but we highly recommend a minimum immersion depth of 1.5". Short probes run the risk of error due to stem conduction effects.

Specifications
Temperature Range: -50 to 200°C (-58 to 392°F)
Thermistor Sensor: Refer to Table 1 on next page
Operating Current: 12 micro-amps
Insulation Resistance: 100 MΩ minimum at 100 Vdc at ambient temperature
Response Time: Approximately 7 seconds (50%), 8 seconds (63.2%), 14 seconds (90%) in water flowing at 0.91 m (3') per second
External Materials: 316L stainless steel sheath and housing except connector insert
IP Rating: IP67 with mating connector installed
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Standard
TH-22A-2252-1/4-0600-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath, 2252 Ω, 1/4" diameter, 6" long, M12 male connector
TH-22B-2252-1/4-0600-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with 1/2 NPT mounting, 2252 Ω, 1/4" diameter, 6" long, M12 male connector
TH-22C-2252-1/4-0600-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with 3/8 NPT mounting, 2252 Ω, 1/4" diameter, 6" long, M12 male connector
TH-22D-2252-1/4-0600-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with 1/4 NPT mounting, 2252 Ω, 1/4" diameter, 6" long, M12 male connector
Metric
TH-22A-2252-M6-0150-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath 2252 Ω, 6 mm diameter, 150 mm long, M12 male connector
TH-22E-2252-M6-0150-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with M8x1 mounting, 2252 Ω, 6 mm diameter, 150 mm long, M12 male connector
TH-22F-2252-M6-0150-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with M10x1 mounting, 2252 Ω, 6 mm diameter, 150 mm long, M12 male connector
TH-22G-2252-M6-0150-M12
Consult Sales  
Availability: 
 
 
Straight sheath with G1/2 mounting thread, 2252 Ω, 6 mm diameter, 150 mm long, M12 male connector
TH-22H-2252-M6-0150-M12
AUD241.00
Availability: 6 weeks
 
Straight sheath with G1/4 mounting thread, 2252 Ω, 6 mm diameter, 150 mm long, M12 male connector
All amounts shown in AUD
Note: For lengths other than 6", change “-0600” in model number to required length and add additional cost per inch greater than 6", (example: 9" = 0900, 41/2" = 0450). For 1/8" probe diameters, change “-1/4” in model number to “-1/8”, no additional cost. For 3K, 5K or 10K O thermistor elements change “-2252” to desired resistance. For dual element 1/4" or 6 mm diameter versions, add “-DUAL” to the end of the model number (not available in 1/8" or 3 mm diameter probes), for an additional cost.
Ordering Example: (1) TH-22A-2252-1/4-0600-M12  Straight sheath, 2252 Ω, 1/4" diameter, 6" long, M12 male connector, AUD241.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Mounting Thread select from:
A for None
B for 1/2 NPT
C for 3/8 NPT
D for 1/4 NPT
E for M8x1
F for M10x1
G for G1/2 BSPP
H for G1/4 BSPP

(2) Resistance select from:
2252 for 2252 Ohm
3000 for 3000 Ohm
5000 for 5000 Ohm
10000 for 10000 Ohm

(3) Diameter select from:
1/4 for 1/4 Inch
M6 for 6 mm

(4) Length (Custom lengths available) select from:
0600 for 6 Inch
0150 for 150 mm

(5) Dual Element select from:
Nothing(leave field blank) for Standard
-DUAL for Dual Element
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.