1/8 DIN Dual Temperature, Process and Strain PID Controllers

CNI8DH and CNI8DV

PLACE ORDER

Embedded Ethernet Connectivity (Optional)
Dual Display with Bright Color-Changing Feature
Programmable Digital Filter
2 Control or Alarm Outputs (Choice of DC Pulse, Solid State Relays, Mechanical Relays, Analog Voltage and Current)
Full Autotune PID Control
Built-In Excitation
Front Removable

Instrumentation for Pressure and Strain Measurements - View related products

Description

*For our newest line of controllers with Modbus connectivity, expanded ramp and soak programs, universal inputs, and simple PC programming, visit our CNPT Series.*

The OMEGA™ CNi8DH and CNi8DV are high-quality, highly accurate single loop autotune PID temperature and process controllers for 1/8 DIN (92 x 45 mm) horizontal or vertical panel cutouts. Both devices feature the same state-of-the-art technology, uncompromising accuracy, and quality backed by an extended 5-year warranty.

The CNi8DH and CNi8DV are simple to configure and use, while providing tremendous versatility and a wealth of powerful features.

The CNi8DH and CNi8DV come standard with your choice of 2 control or alarm outputs in almost any combination: solid state relays rated at 0.5 A @ 120/240 Vac; Form "C" SPDT relays rated at 3 A @ 120/240 Vac; pulsed 10 Vdc output for use with an external SSR; or analog output (0 to 10 Vdc or 0 to 20 mA) selectable for control or retransmission of the process value.

The universal temperature and process instrument (CNi8 models) offer a selection of 10 thermocouple types as well as 2-, 3- or 4-wire RTDs, process voltage and current. The CNi8DH and CNi8DV are ideal controllers for use with transmitters and amplified transducers. Built-in excitation is standard (24 Vdc @ 25 mA). The units handle 0 to 20 mA process current and process voltage in 3 scales: 0 to 100 mV, 0 to 1V, and 0 to 10V.

As with all iSeries devices, the process value display can be programmed to change color between GREEN, AMBER, or RED at any setpoint or alarm point. The LEDs displaying the process value on the CNi8DH (horizontal 1/8 DIN) are the largest digits of any 1/8 DIN controller.

The strain/process instrument (model CNiS) meters and controllers measure inputs from load cells, pressure transducers, and most any strain gage sensor. Input ranges include 0 to 100 mVdc; -100 mVdc to 1 Vdc; 0 to 10 Vdc in addition to 0 to 20 mA. Excitation for transducers of 5 V and 10 V is standard.

The highly recommended networking and communications options include direct Ethernet LAN connectivity with an embedded Web server, and serial communications. The C24 serial communications option includes both RS232 and RS485 which can be selected from the menu as well as a straightforward ASCII protocol. The C4EIT option includes both Ethernet and RS485 ASCII on 1 device.

The iSeries, with the network options, are designed for easy integration with popular industrial automation and control programs as well as Microsoft Visual Basic and Excel. OMEGA™ provides free configuration software which makes it fast and easy to get up and running with many applications. Available for download off the Internet.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Below are examples of common part numbers. Use the Part Number Builder below this table to choose your exact configuration.

CNi8DH22

AUD859.88

Availability: 7 weeks

Temperature/Process1/8 DIN Dual Display Horizontal with 2 Control Outputs. Two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous

CNi8DV23

Consult Sales

Availability:

Temperature/Process 1/8 DIN Dual Display Vertical with 2 Control Outputs. SSR and relay: Form C SPDT 3 A @ 120 Vac, 3 A @ 240 Vac

CNiS8DH33

AUD978.48

Availability: 7 weeks

Strain/Process1/8 DIN Dual Display Horizontal with 2 Control Outputs. 2 Relays: Form C SPDT 3 A @ 120 Vac, 3 A @ 240 Vac

CNiS8DV22

Consult Sales

Availability:

Strain/Process 1/8 DIN Dual Display Vertical with 2 Control Outputs. Two solid state relays (SSR's): 0.5 A @ 120/240 Vac continuous

Software

OPC-SERVER LICENSE

Consult Sales

Availability:

OPC Server/Driver Software License(Requires Network Option)

Factory Setup

-FS

Consult Sales

Availability:

Factory Setup and Configuration, $50 Charge

† All amounts shown in AUD
Note: 1. "-DC", "-C24", and "-C4EIT" not available with excitation.
2. Analog output is not available with "-AL" units.
3. "-SM" option not available on CNiS strain models.

Ordering Example: (1) CNI8DH43 horizontal 1/8 DIN dual display with pulse control and relay, AUD859.88

Part Number Builder

Build Your Part Number Below

(1)	(2)	(3)	(4)	(5)

Option Descriptions:

(1) Input/Display Orientation select from:
CNi8DH for Temperature/Process1/8 DIN Dual Display Horizontal with 2 Control Outputs
CNi8DV for Temperature/Process 1/8 DIN Dual Display Vertical with 2 Control Outputs
CNiS8DH for Strain/Process1/8 DIN Dual Display Horizontal with 2 Control Outputs
CNiS8DV for Strain/Process 1/8 DIN Dual Display Vertical with 2 Control Outputs

(2) Control Outuputs #1 & 2 Direct (Cool) or Reverse (Heat) Acting select from:
22 for Two solid state relays (SSR) 0.5 A @ 120/240 Vac continuous
23 for SSR and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
24 for SSR and pulsed 10 Vdc @ 20 mA (for use with external SSR)
33 for 2 Relays Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
42 for Pulsed 10 Vdc @ 20 mA (for use with external SSR) and SSR
43 for Pulsed 10 Vdc @ 20 mA (for use with external SSR) and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
44 for Two pulsed 10 Vdc @ 20 mA (for use with external SSR)
52 for Analog Output selectable as either control or retransmission of process value 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR
53 for Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay
54 for Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulse 10 Vdc

(3) Network Options select from:
Nothing(leave field blank) for no network option
-C24 for Isolated RS232 and RS485/422(not available with excitation)
-EIT for Ethernet with Embedded Web Server
-C4EIT for Ethernet with Embedded Web Server + Isolated RS485/422 hub for up to 31 devices(not available with excitation)

(4) Power Supply select from:
Nothing(leave field blank) for Standard power input for 90 to 240 Vac/dc 50 to 400 Hz (no entry required)
-DC for 12-36 Vdc and/or 24 Vac(not available with excitation)

(5) Factory Setup select from:
Nothing(leave field blank) for no option
-FS for Factory Setup and Configuration

Note: All combinations may not be valid, check spec sheet for valid part numbers.

Product Manuals:

Download CNi16, CNi16D Series - -SM Version (Simplified Menu)

Download CNi16, CNi16D - i Series Controller Manual

Download CNi8, CNi8DH, CNi8DV Series - i Series Controller Quick Start Manual

Download CNi8, CNi8DH, CNi8DV - i Series Controller Manual

Download CNi8, CNi8DH, CNi8DV - -SM Version (Simplified Menu)

Download CNi/CNiS/CNiTH 8,8C,8D,16,16D - -EIT/-C4EIT Option - Embedded Ethernet for iSeries Monitor/Controller